PhD Alberto Ramil Rego  

Catedrático de universidade (CAT-UN)

Department Naval and Industrial Engineering
Knowledgment area Mechanical Engineering
Research  Research group Laboratorio de Aplicaciones Industriales del Láser
Research lines Aplicaciones industriales del láser; Micromecanizado con láser; Análisis no destructivo con láser
Keywords laser micromachining; optical metrology
Teaching merits evaluation 6 five years period(s)
Research merits evaluation 5 six years period(s)
Contacto UDC directory
Orcid id0000-0002-5333-9425 ResearcherIDB-4698-2008 Scopus6603288161

Teaching

Subjects taught

This section shows the teaching given in degrees, masters and other officers studies in last 6 years.

Subject and involved studies Distance hours Total hours
Master Thesis
Master's Degree in Industrial Computing and Robotics
Master's Degree in Industrial Computing and Robotics
0 4
Subject and involved studies Distance hours Total hours
Emerging Manufacturing Technologies 0 3.5
Emerging Manufacturing Technologies Workshop 0 4
Kinematics and Dynamics of Industrial Robots 0 7.5
Mechanics
Complementos de Formación previos para el M.U. en Ingeniería Naval y Oceánica
0 90
Subject and involved studies Distance hours Total hours
Emerging Manufacturing Technologies
Master's Degree in Industrial Computing and Robotics
0 12
Emerging Manufacturing Technologies Workshop
Master's Degree in Industrial Computing and Robotics
0 12
Engineering Metrology and Quality Control
Complementos de Formación previos para el M.U. en Ingeniería Industrial
Degree in Mechanical Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
0 20
Kinematics and Dynamics of Industrial Robots
Master in Industrial Engineering
Master in Industrial Engineering
0 21
Mechanics
Complementos de Formación previos para el M.U. en Ingeniería Naval y Oceánica
Degree in Naval Architecture and Ocean Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
0 90
Subject and involved studies Distance hours Total hours
Emerging Manufacturing Technologies
Master's Degree in Industrial Computing and Robotics
0 10
Emerging Manufacturing Technologies Workshop
Master's Degree in Industrial Computing and Robotics
0 6
Engineering Metrology and Quality Control
Complementos de Formación previos para el M.U. en Ingeniería Industrial
Degree in Mechanical Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
0 20
Kinematics and Dynamics of Industrial Robots
Master in Industrial Engineering
Master in Industrial Engineering
0 21
Mechanics
Complementos de Formación previos para el M.U. en Ingeniería Naval y Oceánica
Degree in Naval Architecture and Ocean Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
0 90
Subject and involved studies Distance hours Total hours
Emerging Manufacturing Technologies
Master's Degree in Industrial Computing and Robotics
0 5
Emerging Manufacturing Technologies Workshop
Master's Degree in Industrial Computing and Robotics
0 4
Final Year Dissertation
Automation and Industrial Electronics Engineering
0 4
Kinematics and Dynamics of Industrial Robots
Master in Industrial Engineering
0 21
Mechanics
Degree in Mechanical Engineering
0 90
Subject and involved studies Distance hours Total hours
Advanced manufacturing techniques
Degree in Industrial Technology Engineering
Degree in Industrial Technology Engineering
0 7
Final Year Dissertation
Degree in Industrial Technology Engineering
0 4
Kinematics and Dynamics of Industrial Robots
Master in Industrial Engineering
0 21
Mechanics
Degree in Mechanical Engineering
0 90

EOG works and final master thesis directed

Directed or codirected by current teacher since 2013 year.

Research results

Select merit type and year to query research merits.

AYUDAS PARA LA CONSOLIDACIÓN Y ESTRUTURACIÓN DE UNIDADES DE INVESTIGACIÓN COMPETITIVAS. GPC 2023

Funding entity Consellería de Cultura, Educación e Ordenación Universitaria
Main researches Armando Yáñez Casal
Type Proyecto Programas Autonomicos
Dates From 01/01/2023 to 20/11/2025

ACTIVIDADES DE ASESORAMIENTO Y ASISTENCIA TÉCNICA ENTRE LA FUNDACIÓN UNIVERSIDADE DA CORUÑA Y LA EMPRESA IMPRESION3D ATLANTICO SL: ASESORAMIENTO EN ESTUDIO DE TRATAMIENTO DE REFUSIÓN POR LÁSER PARA MEJORA DE ACABADO SUPERFICIAL DE PIEZAS EN PLA

Funding entity Impresion3d Atlantico S.L
Main researches Alberto Ramil Rego
Type Contrato
Dates From 20/09/2023 to 31/10/2023

Sistema de ablación láser asistido por robot para aplicaciones en el patrimonio cultural.

Funding entity Ministerio de Ciencia e Innovación
Main researches Ana Jesús López Díaz
Type Proyecto Programas Nacionales
Dates From 01/09/2022 to 31/08/2025

Optimización de los procesos de ablación láser para la limpieza y texturizado de superficies en 3D de rocas ornamentales

Funding entity Ministerio de Economía y Competitividad (MINECO)
Main researches Alberto Ramil Rego
Type Proyecto Programas Nacionales
Dates From 01/01/2018 to 31/12/2020

Modificación superficial de aleaciones de titanio beta mediante tecnología láser

Funding entity Ministerio de Economía y Competitividad (MINECO)
Main researches Armando José Yáñez Casal
Type Proyecto Programas Nacionales
Dates From 01/01/2015 to 31/12/2017

OPTIMIZACION DE LA LIMPIEZA CON LASER DE PATINAS DESARROLLADAS SOBRE GRANITOS Y ROCAS AFINES. APLICACION A LA CONSERVACION DEL PATRIMONIO

Funding entity Ministerio de Economía y Competitividad (MINECO)
Type Proyecto Programas Nacionales
Dates From 01/01/2015 to 31/12/2017

Mejora de las propiedades superficiales de materiales metálicos: procesado mediante láser y análisis de su respuesta a la oxidación y corrosión

Funding entity Ministerio de Economía y Competitividad (MINECO)
Main researches Armando José Yánez Casal
Type Proyecto Programas Nacionales
Dates From 31/12/2014 to 31/12/2015

Axudas para a consolidación e estruturación de unidades de investigación competitivas do Sistema Universitario de Galicia para 2013

Funding entity Secretaría Xeral de Universidades - Xunta de Galicia
Main researches Armando Yáñez Casal
Type Proyecto Programas Autonomicos
Dates From 01/01/2013 to 31/12/2015

Modelado y validación del plaqueado por láser y soldadura por conducción

Funding entity Ministerio de Ciencia e Innovación
Main researches Armando José Yáñez Casal
Type Proyecto Otros Programas
Dates From 01/01/2009 to 31/12/2011

Consolidación e estruturación de grupos de investigación: "Grupo de aplicacións industriais do láser. LAIL"

Funding entity CONSELLERIA DE ECONOMIA E FACENDA (XUNTA)
Main researches Armando J. Yáñez Casal
Type Proyecto Otros Programas
Dates From 01/01/2009 to 16/12/2009

Mejora de la resistencia al desgaste de aceros y superaleaciones de base níquel mediante proyección térmica de polvos nanocristalinos.

Funding entity Xunta de Galicia
Main researches Armando Yáñez Casal
Type Proyecto Programas Autonomicos
Dates From 07/08/2008 to 07/10/2010

Consolidación e estruturación de grupos de investigación: "Laboratorio de aplicaciones industriales do láser. LAIL"

Funding entity Dirección Xeral de Investigación, Desenvolvemento e Innovación
Main researches Armando J. Yáñez Casal
Type Proyecto Otros Programas
Dates From 01/01/2008 to 07/11/2008

Aplicacions láser para a reparación naval: rexeneración e recubrimento de elementos mecánicos

Funding entity CENTRO TECNOLÓXICO DO NAVAL GALEGO (CETNAGA)
Main researches Armando José Yáñez Casal
Type Contrato
Dates From 01/10/2008 to 30/09/2011

Modelo matemático de plaqueamento por láser e de soldadura por condución

Funding entity Xunta de Galicia, Consellería de Innovación,Industria e Comercio
Main researches Armando J. Yáñez Casal
Type Proyecto Otros Programas
Dates From 01/01/2006 to 31/12/2007

Láser como ferramenta de apoio á restauración do patrimonio cultural: estudo das necesidades empresariais e aplicación a espécimes reais

Funding entity Xunta de Galicia, Consellería de Innovación,Industria e Comercio
Main researches Armando José Yáñez Casal
Type Proyecto Otros Programas
Dates From 01/10/2006 to 01/10/2009

CONVENIO ESPECÍFICO DE COLABORACIÓN ENTRE A UDC E A ASOCIACIÓN DE INVESTIGACIÓN METALÚRGICA DEL NOROESTE ( AIMEN ) PARA PROXECTOS DE INVESTIGACIÓN

Funding entity ASOCIACIÓN DE INVESTIGACIÓN METALÚRXICA DO NOROESTE ( AIMEN )
Main researches Armando J. Yáñez Casal
Type Contrato
Dates From 01/01/2005 to 01/01/2006

Modelado matemático de plaqueado por láser y soldadura por conducción

Funding entity MINISTERIO DE EDUCACIÓN Y CIENCIA
Main researches Armando José Yáñez Casal
Type Proyecto Otros Programas
Dates From 31/12/2005 to 30/12/2008

Estudio de aplicación de la técnica LIPS al análisis y caracterización de cerámicas.

Funding entity Xunta de Galicia, Consellería de Innovación,Industria e Comercio
Main researches Armando José Yáñez Casal
Type Proyecto Otros Programas
Dates From 05/08/2005 to 04/08/2008

Modelización y Análisis de tensiones residuales en procesos de plaqueado por láser

Funding entity MINISTERIO DE EDUCACIÓN Y CIENCIA
Main researches Armando José Yáñez Casal
Type Proyecto Otros Programas
Dates From 21/12/2005 to 31/12/2005

Cálculo de tensiones residuales en procesos de tratamiento de materiales con láser desarrollo de un modelo de elementos finitos y su aplicación al recargue por láser

Funding entity Dirección Xeral de Investigación, Desenvolvemento e Innovación
Main researches Armando José Yáñez Casal
Type Proyecto Programas Autonomicos
Dates From 01/10/2005 to 30/09/2008

Modelización, monitorización y control de procesos de tratamiento de materiales metálicos con láser (INCENTIVO)

Funding entity Dirección Xeral de Investigación e Desenvolvemento
Main researches Armando José Yáñez Casal
Type Proyecto Otros Programas
Dates From 04/10/2004 to 03/09/2007

CONVENIO DE COLABORACIÓN ENTRE A FUNDACIÓN ARAO E A UDC PARA REALIZACIÓN DO PROXECTO DE INVESTIGACIÓN "LIMPEZA DE LÁSER COMO ALTERNATIVO ÓS PROCESOS DE BIORREMEDIACIÓN EN ROCHAS"

Funding entity FUNDACIÓN ARAO
Main researches Armando José Yáñez Casal
Type Contrato
Dates From 10/10/2003 to 10/04/2005

CONTRATO ENTRE PALLADIUM ESTUDIO DE ARQUEOLOGÍA, S.L., D. ARMANDO YÁÑEZ CASAL Y LA FUDC PARA REALIZACION PROYECTO: APLICACIÓN DE LA TÉCNICA LÁSER A LA RESTAURACIÓN Y CONSERVACIÓN DEL PATRIMONIO

Funding entity PALLADIUM ESTUDIO DE ARQUEOLOGÍA, S.L.
Main researches Armando José Yáñez Casal
Type Contrato
Dates From 10/11/2003 to 10/11/2006

Modelización, monitorización y control de tratamientos térmicos superficiales de materiales metálicos con laser

Funding entity Comisión Interministerial de Ciencia y Tecnología (CICYT)
Main researches Armando Yañez Casal
Type Proyecto Otros Programas
Dates From 01/12/2003 to 30/12/2006

Recubrimientos cerámicos de aceros mediante láser de CO2

Funding entity Secretaria Xeral de Investigación e Desenvolvemento Tecnolóxico
Main researches Armando José Yáñez Casal
Type Proyecto Otros Programas
Dates From 30/10/2003 to 29/10/2006

Tratamientos físico-químicos inducidos por láser de los vertidos de fuel del Prestige

Funding entity Comisión Interministerial de Ciencia y Tecnología (CICYT)
Type Proyecto Otros Programas
Dates From 01/12/2003 to 30/11/2006

El láser como nueva técnica de eliminación selectiva de capas de pintura (XUGA2002)

Funding entity Secretaria Xeral de Investigación e Desenvolvemento Tecnolóxico
Main researches Ginés Nicolás Costa
Type Proyecto Otros Programas
Dates From 01/01/2002 to 30/12/2004

CONVENIO ENTRE ABN PIPE SISTEMAS, S.L., EL PROFESOR D. ARMANDO YÁÑEZ CASAL Y LA FUNDACIÓN UDC PARA REALIZACIÓN PROYECTO DENOMINADO ESTUDIO DE TECNOLOGÍAS DE UNIÓN DE POLIPROPILENO

Funding entity ABN PIPE SISTEMAS, S.L.
Main researches Armando José Yáñez Casal
Type Contrato
Dates From 20/11/2001 to 20/03/2002

CONVENIO ESPECÍFICO ENTRE UNIÓN-FENOSA Y LA UDC PARA LA REALIZACIÓN DEL PROYECTO DE INVESTIGACIÓN TRATAMIENTO TÉRMICO SUPERFICIAL DE METALES POR APLICACIÓN DEL LÁSER.

Funding entity UNION ELECTRICA FENOSA
Main researches Pedro Fraga López
Type Contrato
Dates From 01/01/2000 to 01/01/2001

El láser como tecnología limpia: Aplicación a la descontaminación de superficies

Funding entity Consellería de Medio Ambiente e Ordenación do Territorio
Main researches Alberto Ramil Rego
Type Proyecto Otros Programas
Dates From 01/01/1999 to 31/12/2002

Recubrimiento de válvulas de motores diesel mediante láser de CO2

Funding entity Comisión Interministerial de Ciencia y Tecnología (CICYT)
Main researches Armando José Yáñez Casal
Type Proyecto Otros Programas
Dates From 30/12/1999 to 31/12/2001

Desarrollo e instrumentación industrial de procesos de corte, soldadura y tratamiento superficial con láseres de potencia

Funding entity Dirección Xeral de Universidades
Type Proyecto Otros Programas
Dates From 01/01/1996 to 31/12/1998

Desarrollo e instrumentación industrial de procesos de corte, soldadura y tratamientos superficiales con láseres de potencia

Funding entity Dirección Xeral de Universidades
Main researches José Luis Ocaña Moreno
Type Proyecto Otros Programas
Dates From 01/01/1994 to 01/12/1995

Sistema de puntería para pirómetro

Type Patente
Entity Universidade da Coruña (UDC)
Authors Carlos Álvarez-Feal, Alberto Ramil Rego, Ginés Nicolás Costa
Application date 23/04/2001
Approval date 01/10/2004

Pantalla absorbente de radiación láser reflejada

Type Patente
Entity Universidade da Coruña (UDC)
Authors Carlos Álvarez-Feal, Alberto Ramil Rego, Armando José Yáñez Casal
Application date 26/03/2001
Approval date 01/10/2004

Robot-assisted laser ablation for 3D surfaces. Application for paint removal with ultrashort pulse laser

Authors Angel Rodríguez, Ana J. López, Javier Lamas, Alicia Moreno, Alberto Ramil
Journal OPTICS AND LASERS IN ENGINEERING (pages 1 to 10)
DOI https://doi.org/10.1016/j.optlaseng.2022.107284

Building Granite Characterisation, Construction Phases, Mason's Marks and Glyptography of Nossa Senhora de Guadalupe Church, Mouçós e Lamares, Galicia-North Portugal Euroregion

Authors Freire-Lista, David M., Campos, Bruno B., Moreira, Patrícia, Alberto Ramil Rego, Ana Jesús López Díaz
Journal Geoheritage journal Vol. 15 Num. 24 (pages 1 to 25)
DOI https://doi.org/10.1007/s12371-023-00790-4

Considerations on the programmed functional life (one generation) of a green artificial reef in terms of the sustainability of the modified ecosystem

Authors Luis Carral Couce, javier Tarrío-Saavedra, Juan J. Cartelle Barros, Carolina Camba Fabal, Alberto Ramil Rego, Carlos Álvarez-Feal
Journal HELIYON Vol. 9 Num. 4 (pages 1 to 22)
DOI https://doi.org/10.1016/j.heliyon.2023.e14978

DIGITAL HOLOGRAPHIC INTERFEROMETRY AS A METHOD FOR ANALYZING LASER-INDUCED MICRODILATION PROCESS

Authors Götte, Alarcon_Lasagno, Beltrame, G. Romero, F_Vincitorio, Alberto Ramil, Ana J. López
Journal Anales AFA (pages 1 to 7)
DOI https://doi.org/10.31527/analesafa.2023.34.1.1

Characterization of Talcose Rocks Derived from Serpentinite: Pilot Study in the Ultramafic Complex of Cabo Ortegal (Spain) for Potential Use and Commercialization

Authors Pereira, Dolores, Rivas, Teresa, Ana Jesús López Díaz, Alberto Ramil Rego, Bloise, Andrea
Journal Applied Sciences Vol. 13 Num. 22 (pages 1 to 13)
DOI https://doi.org/10.3390/app132212183

Galician research on the application of laser technology in the cleaning of material cultural heritage: past and future strategies.

Authors Santiago Pozo Antonio, Teresa Rivas Brea, Alberto Ramil Rego, Ana Jesús López Díaz
Journal Cadernos do Laboratorio Xeolóxico de Laxe Num. 45 (pages 17 to 31)
DOI https://doi.org/10.17979/cadlaxe.2023.45.0.9457

Dual combination of cleaning methods (scalpel, biocide, laser) to enhance lichen removal from granite

Authors J.S. Pozo-Antonio, T. Rivas, M.E. López de Silanes, A. Ramil, Ana Jesús López Díaz
Journal INTERNATIONAL BIODETERIORATION & BIODEGRADATION Vol. 168 (pages 1 to 10)
DOI https://doi.org/10.1016/j.ibiod.2022.105373

Femtosecond pulsed laser ablation for paint removal at oblique illumination: Effect of the incidence angle

Authors Alicia Moreno Madariaga, Ana Jesús López Díaz, Javier Lamas, A. Ramil
Journal Optik International Journal for Light and Electron Optics Vol. 264 (pages 1 to 11)
DOI https://doi.org/10.1016/j.ijleo.2022.169428

The Importance of Prevention When Working with Hazardous Materials in the Case of Serpentinite and Asbestos When Cleaning Monuments for Restoration

Authors Dolores Pereira, Ana Jesús López Díaz, A. Ramil, Andrea Bloise
Journal Applied Sciences Vol. 13 Num. 43 (pages 1 to 13)
DOI https://doi.org/10.3390/app13010043

Femtosecond laser texturing as a tool to increase the hydrophobicity of ornamental stone: The influence of lithology and texture

Authors A. J. López, Santiago Pozo Antonio, Alicia Moreno Madariaga, Teresa Rivas Brea, Dolores Pereira, Alberto Ramil Rego
Journal JOURNAL OF BUILDING ENGINEERING Vol. 51 (pages 1 to 15)
DOI https://doi.org/10.1016/j.jobe.2022.104176

A novel method based on digital holographic interferometry (DHI) to in-situ register the dynamic behavior of concrete 20th century building heritage

Authors Fabio M. Vincitorio, Gustavo Bolla, Ana Flores, Micaela Gómez-Coronel, A. Ramil, A. J. López
Journal Proceedings of The International Society for Optical Engineering Vol. 11784 (pages 1 to 8)
DOI https://doi.org/10.1117/12.2592112

Development of a laser cleaning robot system for the processing of 3D surfaces

Authors Angel Rodríguez, A. J. López, Javier Lamas Vigo, Alicia Moreno Madariaga, A. Ramil
Journal Proceedings of The International Society for Optical Engineering Vol. 11785 (pages 1 to 8)
DOI https://doi.org/10.1117/12.2592111

Enhancement of graffiti removal from heritage stone by combining laser ablation and application of a solvent mixture

Authors C. Ricci, F. Gambino, M. Nervo, A. Piccirillo, A. Scarcella, F. Zenucchini, A. Ramil, Santiago Pozo Antonio
Journal CONSTRUCTION AND BUILDING MATERIALS Vol. 262 Num. 119934 (pages 1 to 14)
DOI https://doi.org/10.1016/j.conbuildmat.2020.119934

Using hyperspectral imaging to quantify phototrophic biofilms on granite

Authors A. Ramil, D. Vázquez-Nion, Santiago Pozo Antonio, Patricia Sanmartin, Beatriz Prieto
Journal Journal of Environmental Informatics Vol. 35 Num. 1 (pages 34 to 44)
DOI https://doi.org/10.3808/jei.201800401

Influence of the weathering rate on the response of granite to nanosecond UV laser irradiation

Authors Teresa Rivas Brea, Santiago Pozo Antonio, A. Ramil, Ana Jesús López Díaz
Journal SCIENCE OF THE TOTAL ENVIRONMENT Vol. 706 Num. 135999 (pages 1 to 14)
DOI https://doi.org/10.1016/j.scitotenv.2019.135999

Development of processing strategies for 3D controlled laser ablation: Application to the cleaning of stonework surfaces

Authors Ana Jesús López Díaz, Javier Lamas Vigo, Santiago Pozo Antonio, Teresa Rivas Brea, A. Ramil
Journal OPTICS AND LASERS IN ENGINEERING Vol. 126 Num. 105897 (pages 1 to 9)
DOI https://doi.org/10.1016/j.optlaseng.2019.105897

Ultrafast laser surface texturing: A sustainable tool to modify wettability properties of marble

Authors Ana Jesús López Díaz, A. Ramil, J.S. Pozo-Antonio, Teresa Rivas Brea, Dolores Pereira
Journal Sustainability Vol. 11 Num. 15 (pages 1 to 17)

A computer vision system for identification of granite-forming minerals based on RGB data and artificial neural networks

Authors A. Ramil, A. J. López, J.S. Pozo-Antonio, Teresa Rivas Brea
Journal Measurement Vol. 117 (pages 90 to 95)
DOI https://doi.org/10.1016/j.measurement.2017.12.006

Improvement of crack detection on rough materials by digital holographic interferometry in combination with non-uniform thermal loads

Authors F. Vincitorio, L. Bahuer, María Paula Fiorucci Alsina, A. J. López, A. Ramil
Journal Optik International Journal for Light and Electron Optics Vol. 163 (pages 43 to 48)
DOI https://doi.org/10.1016/j.ijleo.2018.02.068

Laser versus scalpel cleaning of crustose lichens on granite

Authors Teresa Rivas Brea, J.S. Pozo-Antonio, M.E. López de Silanes, Alberto Ramil Rego, A. J. López
Journal APPLIED SURFACE SCIENCE Vol. 440 (pages 467 to 476)

Influence of the commercial finishes of ornamental granites on roughness, colour and reflectance

Authors Ana Jesús López Díaz, J.S. Pozo-Antonio, Alberto Ramil Rego, Teresa Rivas Brea
Journal CONSTRUCTION AND BUILDING MATERIALS Vol. 182 (pages 530 to 540)
DOI https://doi.org/10.1016/j.conbuildmat.2018.06.144

Multi-scale characterization of topographic modifications on metallic biomaterials induced by nanosecond Nd:YVO4 laser structuring

Authors María Paula Fiorucci Alsina, Ana Jesús López Díaz, Alberto Ramil Rego
Journal PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING Vol. 53 (pages 163 to 168)
DOI https://doi.org/10.1016/j.precisioneng.2018.03.009

Mechanical and laser cleaning of spray graffiti paints on a granite subjected to a SO2-rich atmosphere

Authors Vera Gomes, Amélia Dionísio, J.S. Pozo-Antonio, Teresa Rivas Brea, A. Ramil
Journal CONSTRUCTION AND BUILDING MATERIALS Vol. 188 (pages 621 to 632)
DOI https://doi.org/10.1016/j.conbuildmat.2018.08.130

Detection of the optimal laser fluence ranges to clean graffiti on silicates

Authors Alberto Ramil Rego, Santiago Pozo, María Paula Fiorucci Alsina, Ana Jesús López Díaz, Teresa Rivas Brea
Journal CONSTRUCTION AND BUILDING MATERIALS Vol. 148 (pages 122 to 130)
DOI https://doi.org/10.1016/j.conbuildmat.2017.05.035

Automatic Identification of Rock-Forming Minerals in Granite Using Laboratory Scale Hyperspectral Reflectance Imaging and Artificial Neural Networks

Authors Ana Jesús López Díaz, Alberto Ramil Rego, Santiago Pozo, María Paula Fiorucci Alsina, Teresa Rivas Brea
Journal JOURNAL OF NONDESTRUCTIVE EVALUATION Vol. 36:52 (pages 1 to 9)
DOI https://doi.org/10.1007/s10921-017-0431-7

Effectiveness and harmfulness evaluation of graffiti cleaning by mechanical, chemical and laser procedures on granite

Authors Santiago Pozo Antonio, Teresa Rivas Brea, María Paula Fiorucci Alsina, Ana Jesús López Díaz, Alberto Ramil Rego
Journal MICROCHEMICAL JOURNAL Vol. 125 (pages 1 to 9)
DOI https://doi.org/10.1016/j.microc.2015.10.040

Suitability of hyperspectral imaging technique to evaluate the effectiveness of the cleaning of a crustose lichen developed on granite

Authors Santiago Pozo Antonio, María Paula Fiorucci Alsina, Teresa Rivas Brea, Ana Jesús López Díaz, Alberto Ramil Rego, D. Barral
Journal APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING Vol. 122 Num. 2 (pages 1 to 9)
DOI https://doi.org/10.1007/s00339-016-9634-5

Effectiveness of chemical, mechanical and laser cleaning methods of sulphated black crusts developed on granite

Authors Santiago Pozo, Alberto Ramil Rego, Teresa Rivas Brea, Ana Jesús López Díaz, María Paula Fiorucci Alsina
Journal CONSTRUCTION AND BUILDING MATERIALS Vol. 112 Num. 1 (pages 682 to 690)
DOI https://doi.org/10.1016/j.conbuildmat.2016.02.195

Characterization of drying paint coatings by dynamic speckle and holographic interferometry measurements

Authors N. Budini, C. Mulone, N. Balducci, Fabio Vincitorio, Ana Jesús López Díaz, Alberto Ramil Rego
Journal APPLIED OPTICS Vol. 55 Num. 17 (pages 4706 to 4712)
DOI https://doi.org/10.1364/ao.55.004706

Effectiveness of granite cleaning procedures in cultural heritage: A review

Authors Santiago Pozo, Teresa Rivas Brea, Ana Jesús López Díaz, María Paula Fiorucci Alsina, Alberto Ramil Rego
Journal SCIENCE OF THE TOTAL ENVIRONMENT Vol. 571 (pages 1017 to 1028)

Hyperspectral Imaging as a Non Destructive Technique to Control the Laser Cleaning of Graffiti on Granite

Authors Santiago Pozo, María Paula Fiorucci Alsina, Alberto Ramil Rego, Teresa Rivas Brea, Ana Jesús López Díaz
Journal JOURNAL OF NONDESTRUCTIVE EVALUATION (pages 35 to 44)
DOI https://doi.org/10.1007/s10921-016-0361-9

The use of hyperspectral imaging technique to detect the most suitable graffiti-cleaning procedure

Authors Santiago Pozo, Alberto Ramil Rego, María Paula Fiorucci Alsina, Ana Jesús López Díaz, Teresa Rivas Brea
Journal Color Research & Application Vol. 41 (pages 308 to 312)
DOI https://doi.org/10.1002/col.22032

Evaluation of the effectiveness of laser crust removal on granites by means of hyperspectral imaging techniques

Authors Santiago Pozo Antonio, María Paula Fiorucci Alsina, Alberto Ramil Rego, Ana Jesús López Díaz, Teresa Rivas Brea
Journal APPLIED SURFACE SCIENCE Vol. 347 (pages 832 to 838)
DOI https://doi.org/10.1016/j.apsusc.2015.04.182

Surface modification of Ti6Al4V by nanosecond laser ablation for biomedical applications

Authors María Paula Fiorucci Alsina, Ana Jesús López Díaz, Alberto Ramil Rego
Journal Journal of Physics Conference Series Vol. 605
DOI https://doi.org/10.1088/1742-6596/605/1/012022

Comparative study of surface structuring of biometals by UV nanosecond Nd:YVO4 laser

Authors Ana Jesús López Díaz, Alberto Ramil Rego, María Paula Fiorucci Alsina
Journal INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY Vol. 75 Num. 1-4 (pages 515 to 521)
DOI https://doi.org/10.1007/s00170-014-6164-1

Finite element model of granite ablation with UV laser

Authors Emilio Saavedra Otero, Ana Jesús López Díaz, Javier Lamas Vigo, María Paula Fiorucci Alsina, Alberto Ramil Rego, Teresa Rivas Brea
Journal MATERIALS SCIENCE FORUM Vol. 730-732 (pages 519 to 524)
DOI https://doi.org/10.4028/www.scientific.net/msf.730-732.519

Optimization of graffiti removal on natural stone by means of high repetition rate UV laser

Authors María Paula Fiorucci Alsina, Ana Jesús López Díaz, Alberto Ramil Rego, Santiago Pozo, Teresa Rivas Brea
Journal APPLIED SURFACE SCIENCE Vol. 278 (pages 268 to 272)
DOI https://doi.org/10.1016/j.apsusc.2012.10.092

Comparative study of ornamental granite cleaning using femtosecond and nanosecond pulsed lasers

Authors Teresa Rivas Brea, Ana Jesús López Díaz, Alberto Ramil Rego, Santiago Pozo Antonio, María Paula Fiorucci Alsina, María Eugenia López de Silanes, Ana Isabel Martínez García, Javier Rodríguez Vázquez de Aldana, Carolina Romero, Pablo Moreno-Villalobos
Journal APPLIED SURFACE SCIENCE Vol. 278 (pages 226 to 233)
DOI https://doi.org/10.1016/j.apsusc.2012.12.038

Two simple methods for overall determination of mobility in dynamic speckle patterns

Authors N. Budini, C. Mulone, Fabio Vincitorio, C. Freyre, Ana Jesús López Díaz, Alberto Ramil Rego
Journal Optik International Journal for Light and Electron Optics Vol. 124 Num. 24 (pages 6565 to 6569)
DOI https://doi.org/10.1016/j.ijleo.2013.05.119

Nd:YVO4 laser removal of graffiti from granite. Influence of paint and rock properties on cleaning efficacy

Authors Teresa Rivas Brea, Santiago Pozo, María Paula Fiorucci Alsina, Ana Jesús López Díaz, Alberto Ramil Rego
Journal APPLIED SURFACE SCIENCE Vol. 263 (pages 563 to 572)
DOI https://doi.org/10.1016/j.apsusc.2012.09.110

Microstructural study of the origin of color in Rosa Porrio granite and laser cleaning effects

Authors E. Urones Garrote, Ana Jesús López Díaz, Alberto Ramil Rego, L. C. Otero Diaz
Journal APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING Vol. 104 Num. 1 (pages 95 to 101)

Laser cleaning of graffiti in Rosa Porrino granite

Authors María Paula Fiorucci Alsina, J. Lamas, Ana Jesús López Díaz, T. Rivas, Alberto Ramil Rego
Journal INTERNATIONAL CONFERENCE ON APPLICATIONS OF OPTICS AND PHOTONICS Vol. 8001 (pages 0 to 0)

Optimisation of laser removal of biological crusts in granites

Authors Ana Jesús López Díaz, T. Rivas, Javier Lamas, Alberto Ramil Rego, Armando José Yáñez Casal
Journal APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING Vol. 100 Num. 3 (pages 733 to 739)

Laser hardening of XC42 steel: Numerical analysis of quenched area

Authors Emilio Saavedra Otero, Alberto Ramil Rego, Ana Jesús López Díaz, Carlos Álvarez-Feal
Journal MATERIALS SCIENCE FORUM (pages 1165 to 1171)

Micromachining of glass by the third harmonic of nanosecond Nd:YVO4 laser

Authors Alberto Ramil Rego, Javier Lamas Vigo, Carlos Álvarez-Feal, Ana Jesús López Díaz, Emilio Saavedra Otero, Armando José Yáñez Casal
Journal APPLIED SURFACE SCIENCE Vol. 255 Num. 10 (pages 5557 to 5560)

Smoothing and simplification algorithm for Computer Aided Manufacturing paths with complex curves

Authors Javier Lamas Vigo, Alberto Ramil Rego, Armando José Yáñez Casal
Journal IFAC Proceedings Volumes (IFAC-PapersOnline) Vol. 4 Num. 1 (pages 61 to 65)

Application of Artificial Neural Networks for the rapid classification of archaeological ceramics by means of laser induced breakdown spectroscopy (LIBS)

Authors Alberto Ramil Rego, Ana Jesús López Díaz, Armando José Yáñez Casal
Journal APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING Vol. 92 (pages 197 to 202)

Improvements in the analysis of diffraction phenomena by means of digital images

Authors Ana Jesús López Díaz, Alberto Ramil Rego
Journal AMERICAN JOURNAL OF PHYSICS Vol. 75 Num. 11 (pages 999 to 1002)

Laser transformation hardening of a tool steel: Simulation-based parameter optimization and experimental results

Authors María José Tobar Vidal, Carlos Álvarez-Feal, José Manuel Amado Paz, Alberto Ramil Rego, Emilio Saavedra Otero, Armando José Yáñez Casal
Journal SURFACE & COATINGS TECHNOLOGY Vol. 200 (pages 6362 to 6367)

LIPS and linear correlation analysisi applied to the classification of Roman potttery Terra Sigillata

Authors Ana Jesús López Díaz, Ginés Nicolás Costa, Maria de la Paz Mateo Orenes, Alberto Ramil Rego, Víctor Piñón Hermida, Armando José Yáñez Casal
Journal APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING Vol. 83 (pages 695 to 698)

Provenance Characterization of Archaeological Ceramics by Laser Induced Plasma Spectroscopy

Authors Ana Jesús López Díaz, Alberto Ramil Rego, Ginés Nicolás Costa, Maria de la Paz Mateo Orenes, Víctor Piñón Hermida, Armando José Yáñez Casal
Journal MATERIALS SCIENCE FORUM (pages 1638 to 1642)

Análisis de cerámicas romanas Terra Sigillata mediante espectroscopía de plasmas inducidos por láser (LIPS)

Authors Ana Jesús López Díaz, Ginés Nicolás Costa, Maria de la Paz Mateo Orenes, Víctor Piñón Hermida, Alberto Ramil Rego, Armando José Yáñez Casal
Journal BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO Vol. 44 Num. 6 (pages 373 to 378)

Application of the Laplace transform dual reciprocity element method in the modelling of laser heat treatments

Authors José Manuel Amado Paz, María José Tobar Vidal, Alberto Ramil Rego, Armando José Yáñez Casal
Journal ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS Vol. 29 (pages 126 to 135)

Compositional analysis of Hispanic Terra Sigillata by laser-induced breakdown spectroscopy

Authors Ana Jesús López Díaz, Ginés Nicolás Costa, Maria de la Paz Mateo Orenes, Víctor Piñón Hermida, María José Tobar Vidal, Alberto Ramil Rego
Journal SPECTROCHIMICA ACTA, PART B: ATOMIC SPECTROSCOPY Vol. 60 (pages 1149 to 1154)

Laser cleaning: an alternative method for removing oil-spill fuel residues

Authors Maria de la Paz Mateo Orenes, Ginés Nicolás Costa, Víctor Piñón Hermida, Alberto Ramil Rego, Armando José Yáñez Casal
Journal APPLIED SURFACE SCIENCE Vol. 247 (pages 333 to 339)

Optimización del recorrido y de la potencia de una haz láser de Co2 en el tratamiento térmico de válvulas de motores diesel

Authors José Manuel Amado Paz, Carlos Álvarez-Feal, Ginés Nicolás Costa, Ana Jesús López Díaz, Jose Antonio Pérez Rodríguez, Alberto Ramil Rego, Emilio Saavedra Otero, Josefa Sanesteban Raposo, María José Tobar Vidal, Armando José Yáñez Casal
Journal REVISTA DE METALURGIA (pages 89 to 94)

Versatile software for semiautomatic analysis and processing of laser-induced plasma spectra

Authors Maria de la Paz Mateo Orenes, Ginés Nicolás Costa, Víctor Piñón Hermida, Carlos Álvarez-Feal, Alberto Ramil Rego, Armando José Yáñez Casal
Journal SPECTROCHIMICA ACTA, PART B: ATOMIC SPECTROSCOPY Vol. 60 (pages 1202 to 1210)

Aplicación del método LTDRM en la modelización del procesado de materiales con láser

Authors María José Tobar Vidal, José Manuel Amado Paz, Alberto Ramil Rego, Emilio Saavedra Otero, Armando José Yáñez Casal
Journal ANALES DE INGENIERÍA MECÁNICA Vol. 4 (pages 2423 to 2431)

Desarrollo de un software de adquisición y análisis de señales

Authors Victor Piñón Hermida, Alberto Ramil Rego, Maria de la Paz Mateo Orenes, Carlos Álvarez-Feal, Ginés Nicolás Costa
Journal ANALES DE INGENIERÍA MECÁNICA Vol. 1 (pages 209 to 214)

Integración en una Aplicación Informática en una Estación de Trabajo de Procesado de Materiales con Láser

Authors Ginés Nicolás Costa, Alberto Ramil Rego, Ana Jesús López Díaz, Carlos Álvarez-Feal, Victor Piñón Hermida
Journal ANALES DE INGENIERÍA MECÁNICA Vol. 1 (pages 208 to 214)

Laser cleaning of Prestige tanker oil spill on coastal rocks controlled by spectrochemical analysis

Authors Maria de la Paz Mateo Orenes, Ginés Nicolás Costa, Victor Piñón Hermida, Carlos Álvarez-Feal, Alberto Ramil Rego, Armando José Yáñez Casal
Journal ANALYTICA CHIMICA ACTA Vol. 524 (pages 27 to 32)

Modelización numérica de procesos de temple de aceros con láser

Authors Emilio Saavedra Otero, Alberto Ramil Rego, Carlos Álvarez-Feal, José Manuel Amado Paz, María José Tobar Vidal, Armando José Yáñez Casal
Journal ANALES DE INGENIERÍA MECÁNICA Vol. 2 (pages 1241 to 1246)

Modelización de las transformaciones de fase en el proceso de endurecimiento de aceros con láser

Authors José Manuel Amado Paz, Carlos Álvarez-Feal, Ginés Nicolás Costa, Ana Jesús López Díaz, Jose Antonio Pérez Rodríguez, Alberto Ramil Rego, Emilio Saavedra Otero, Josefa Sanesteban Raposo, María José Tobar Vidal, Armando José Yáñez Casal
Journal REVISTA DE METALURGIA Vol. 40 Num. 2 (pages 365 to 368)

Modelización y monitorización de procesos de refusión láser de recubrimientos depositados por plasma

Authors José Manuel Amado Paz, Carlos Álvarez-Feal, Ginés Nicolás Costa, Ana Jesús López Díaz, Jose Antonio Pérez Rodríguez, Alberto Ramil Rego, Emilio Saavedra Otero, Josefa Sanesteban Raposo, María José Tobar Vidal, Armando José Yáñez Casal
Journal BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO Vol. 43 Num. 2 (pages 441 to 444)

Soluciones analíticas a la ecuación de conducción del calor sobre geometrías simples con límites físicos: método de las imágenes

Authors Alberto Ramil Rego, Emilio Saavedra Otero, Ana Jesús López Díaz, Maria de la Paz Mateo Orenes, Ginés Nicolás Costa, Victor Piñón Hermida
Journal ANALES DE INGENIERÍA MECÁNICA Vol. 4 (pages 2527 to 2535)

A mild oxidation model valid for discontinuous contacts in sliding wear

Authors Alberto Ramil Rego
Journal WEAR Vol. - Num. 254 (pages 429 to 440)

Modelling of temperature evolution on metals during laser hardening process

Authors Armando José Yáñez Casal, Carlos Álvarez-Feal, Ana Jesús López Díaz, Ginés Nicolás Costa, Jose Antonio Pérez Rodríguez, Alberto Ramil Rego, Emilio Saavedra Otero
Journal APPLIED SURFACE SCIENCE Num. 186 (pages 611 to 616)

Modelling of temperature evolution on metals during laser hardening process.

Authors Armando José Yáñez Casal, Ana Jesús López Díaz, Ginés Nicolás Costa, Jose Antonio Pérez Rodríguez, Alberto Ramil Rego, Emilio Saavedra Otero, José Carlos Álvarez Feal
Journal APPLIED SURFACE SCIENCE Vol. 740 Num. - (pages 1 to 6)

Measurement of negative particle multiplicity in S-Pb collinsions 200 GeV/c per nucleon with the NA36 TPC.

Authors Armando José Yáñez Casal, Alberto Ramil Rego, E. Andersen
Journal Physics Letters B Vol. 516 Num. - (pages 249 to 256)

Predicción de la evolución de la temperatura durante el tratamiento térmico de materiales metálicos por láser

Authors Emilio Saavedra Otero, Ana Jesús López Díaz, Alberto Ramil Rego, Armando José Yáñez Casal
Journal ANALES DE INGENIERÍA MECÁNICA Vol. 3 Num. 3 (pages 1759 to 1764)

UV laser surface processing of metallic alloys: comparison of experimental and numerical results

Authors Ginés Nicolás Costa, Armando José Yáñez Casal, Alberto Ramil Rego, Carlos Álvarez-Feal, Emilio Saavedra Otero, José Luis Ocaña Moreno
Journal APPLIED SURFACE SCIENCE Num. 138 (pages 169 to 173)

Numerical simulation of surface treatment of metallic alloys by excimer lasers

Authors Ginés Nicolás Costa, Armando José Yáñez Casal, Alberto Ramil Rego, Ángel García Beltrán, Carlos Molpeceres Álvarez, José Luis Ocaña Moreno, Michel Autric
Journal LASERS IN ENGINEERING Num. - (pages 199 to 213)

Problemas de Electromagnetismo

Authors José Luis Ocaña Moreno, Armando José Yáñez Casal, Alberto Ramil Rego
ISBN 84-89694-50-8

Problemas de Física

Authors José Luis Ocaña Moreno, Armando José Yáñez Casal, Alberto Ramil Rego
ISBN 84-89694-48-6

Problemas de Mecánica Fundamental

Authors José Luis Ocaña Moreno, Armando José Yáñez Casal, Alberto Ramil Rego
ISBN 84-89694-94-4

Aplicaciones del láser al análisis y conservación de materiales del patrimonio cultural

Authors Tereza Ctvrtnickova. Ana Jesús López Díaz. Maria de la Paz Mateo Orenes. Víctor Piñón Hermida. Ginés Nicolás Costa. Alberto Ramil Rego. Armando José Yáñez Casal
Book Arqueoloxía: Ciencia e Restauración
Vol. - Publishing: Museo de Prehistoria e Arqueoloxía de Vilalba.
ISBN: 987-84-88385-20-3
Pages From 83 to 93

Colour changes in Galician granitic stones induced by UV-Nd:YAG laser irradiation

Authors Alberto Ramil Rego. Ana Jesús López Díaz. Maria de la Paz Mateo Orenes. Carlos Álvarez-Feal. Armando José Yáñez Casal
Book Lasers in the Conservation of Artworks
Vol. - Publishing: CRC-Press.
ISBN: 978-0-415-47596-9
Pages From 199 to 202

Classification of archaeological ceramics by means of laser induced breakdown spectroscopy (LIBS) and artificial neural networks

Authors Alberto Ramil Rego. Ana Jesús López Díaz. Maria de la Paz Mateo Orenes. Armando José Yáñez Casal
Book Lasers in the Conservation of Artworks
Vol. - Publishing: CRC-Press.
ISBN: 978-0-415-47596-9
Pages From 121 to 126

Compositional depth profiles of gilded wood polychromes by means of LIBS

Authors Ana Jesús López Díaz. Alberto Ramil Rego. Maria de la Paz Mateo Orenes. Carlos Álvarez-Feal. Armando José Yáñez Casal
Book Lasers in the Conservation of Artworks
Vol. - Publishing: CRC-Press.
ISBN: 978-0-415-47596-9
Pages From 115 to 120

Sistema de posicionamiento, automatización, muestreo y control para la fabricación en tres dimensiones utilizando el láser como herramienta

Autor Lamas Vigo, Javier
Director/s Alberto Ramil Rego
Scope Escuela Politécnica Superior
Qualification Sobresaliente Cum Laude

Aplicación de la ablación mediante láser pulsado de nanosegundo a la limpieza y texturizado de materiales

Autor Maria Paula Fiorucci
Director/s Ana Jesús López Díaz Alberto Ramil Rego
Scope Escuela Politécnica Superior
Qualification Sobresaliente Cum Laude

Desarrollo de la reconstrucción digital de imágenes holográficas para su aplicación a ensayos no destructivos

Autor Fabio Miguel Vincitorio
Director/s Ana Jesús López Díaz; Alberto Ramil Rego
Scope Ingeniería Industrial 2
Qualification Sobresaliente

Simulación numérica de procesos de tratamiento térmico superficial de aceros con láser de potencia

Autor Emilio Saavedra Otero
Director/s Armando José Yáñez Casal;Alberto Ramil Rego
Scope Ingeniería Industrial 2
Qualification Sobresaliente Cum Laude

A non-destructive protocol for the evaluation of dual wavelength Nd:YAG laser cleaning of gypsum black crusts on granite
TECHNART 2017 Non-destructive and microanalytical techniques in art and cultural heritage
International

Authors J.S. Pozo-Antonio, K. Hatzigiannakis, K. Melessanaki, A. Phillipidis, A. Papanikolaou, Alberto Ramil Rego, Ana Jesús López Díaz, Teresa Rivas Brea, P. Pouli
Organization UNIVERSIDAD DEL PAÍS VASCO
Place Bilbao (España)

On-line photoacoustic monitoring of laser cleaning on stone: Effectiveness evaluation and induced microdamage detection
TECHNART 2017 Non-destructive and microanalytical techniques in art and cultural heritage
International

Authors G. J. Tserevelakis, J.S. Pozo-Antonio, P. Siozos, K. Melessanaki, Teresa Rivas Brea, Alberto Ramil Rego, P. Pouli, G. Zacharakis
Organization UNIVERSIDAD DEL PAÍS VASCO
Place Bilbao (España)

Desarrollo de un sistema de detección de forma para la automatización del procesado por ablación láser de superficies en 3D
XIII Jornadas de Procesado de Materiales con Tecnología Láser
National

Authors A. Ramil, Javier Lamas Vigo, A. J. López
Organization Centro Tecnológico Aimen
Place Porriño, O (España)

Dynamic speckle study of microbial growth
6th International Conference on Speckle Metrology, SPECKLE 2015
International

Authors Fabio Vincitorio, Cecilia Mulone, P. A. Marcuzzi, N. Budini, C. Freyre, Ana Jesús López Díaz, Alberto Ramil Rego
Organization SPIE - The International Society for Optical Engineering
Place Guanajuato (México)

Monitoring the laser cleaning of granites by means of multispectral image analysis
II International Conference on Applications of Optics and Photonics (AOP 2014)
International

Authors María Paula Fiorucci Alsina, Ana Jesús López Díaz, Alberto Ramil Rego, Santiago Pozo, Teresa Rivas Brea
Organization Sociedade Portuguesa para a Investigaçao e Desenvolvimento em Optica e Fotónica
Place Aveiro (Portugal)

Surface Modification Induced by UV Nanosecond Nd:YVO4 Laser Structuring on Biometals
II International Conference on Applications of Optics and Photonics (AOP 2014)
International

Authors María Paula Fiorucci Alsina, Ana Jesús López Díaz, Alberto Ramil Rego
Organization Sociedade Portuguesa para a Investigaçao e Desenvolvimento em Optica e Fotónica
Place Aveiro (Portugal)

Analysis of Small Deflections by Double-Exposure Digital Holographic Interferometry
2014 IEEE BIENNIAL CONGRESS OF ARGENTINA (ARGENCON)
International

Authors N. Budini, C. Mulone, Fabio Vincitorio, Ana Jesús López Díaz, Alberto Ramil Rego
Organization IEEE Argentina
Place San Carlos de Bariloche (Argentina)

Influence of irradiation parameters in nanosecond Nd:YVO4 laser micro-machining of stainless steel for biomedical applications
8th Iberoamerican Optics Meeting and 11th Latin American Meeting on Optics, Lasers, and Applications (RIAO/OPTILAS 2013)
International

Authors María Paula Fiorucci Alsina, Ana Jesús López Díaz, Alberto Ramil Rego
Organization SPIE - The International Society for Optical Engineering
Place Porto (Portugal)

Analysis of strawberry ripening by dynamic speckle measurements
8th Iberoamerican Optics Meeting and 11th Latin American Meeting on Optics, Lasers, and Applications
International

Authors C. Mulone, N. Budini, Fabio Vincitorio, C. Freyre, Ana Jesús López Díaz, Alberto Ramil Rego
Organization SPIE - The International Society for Optical Engineering
Place Porto (Portugal)

Detection of fungi colony growth on bones by dynamic speckle
8th Iberoamerican Optics Meeting and 11th Latin American Meeting on Optics, Lasers, and Applications (RIAO/OPTILAS 2013)
International

Authors F. Vincitorio, N. Budini, C. Mulone, M. Spector, C. Freyre, Ana Jesús López Díaz, Alberto Ramil Rego
Organization SPIE - The International Society for Optical Engineering
Place Porto (Portugal)

Holographic interferometry as a method to detect welding failures on ribbed iron structures
8th Iberoamerican Optics Meeting and 11th Latin American Meeting on Optics, Lasers, and Applications (RIAO/OPTILAS 2013)
International

Authors F. Vincitorio, C. Mulone, N. Budini, C. Freyre, M. Spector, Ana Jesús López Díaz, Alberto Ramil Rego, Armando José Yáñez Casal
Organization SPIE - The International Society for Optical Engineering
Place Porto (Portugal)

Development of an undergraduate optics laboratory based on the analysis of digital images
12TH EDUCATION AND TRAINING IN OPTICS AND PHOTONICS CONFERENCE
International

Authors Alberto Ramil Rego, Ana Jesús López Díaz, María Paula Fiorucci Alsina, F. Vincitorio
Organization SPIE - The International Society for Optical Engineering
Place Porto (Portugal)

AN ARDUINO CONTROLLED CHAOTIC PENDULUM FOR A REMOTE PHYSICS LABORATORY
7TH INTERNATIONAL TECHNOLOGY, EDUCATION AND DEVELOPMENT CONFERENCE (INTED2013)
International

Authors José Carlos Álvarez Feal, Javier Lamas Vigo, Ana Jesús López Díaz, Alberto Ramil Rego
Organization The International Academy of Technology, Education and Development (IATED)
Place Valencia (España)

Dynamic laser speckle applied to the analysis of maturation process of irradiated fresh fruits
SPECKLE 2012: V INTERNATIONAL CONFERENCE ON SPECKLE METROLOGY
International

Authors Fabio Vincitorio, N. Budini, C. Freyre, C. Mulone, Ana Jesús López Díaz, Alberto Ramil Rego, María Paula Fiorucci Alsina
Organization SPIE - The International Society for Optical Engineering
Place Vigo (España)

Development of a portable ESPI system for the analysis in situ of mural paintings
SPECKLE 2012: V INTERNATIONAL CONFERENCE ON SPECKLE METROLOGY
International

Authors Boaglio, E., Javier Lamas Vigo, Ana Jesús López Díaz, Alberto Ramil Rego, Pereira, L., Beatriz Prieto, Silva, B.
Organization SPIE - The International Society for Optical Engineering
Place Vigo (España)

ANALYSIS OF STANDING WAVES IN A STRING BY REMOTELY CONTROLED LABORATORY
INTED2011: 5TH INTERNATIONAL TECHNOLOGY, EDUCATION AND DEVELOPMENT CONFERENCE
International

Authors Javier Lamas Vigo, Carlos Álvarez-Feal, Ana Jesús López Díaz, Alberto Ramil Rego
Organization International Association of Technology, Education and Development
Place Tavernes de la Valldigna (España)

Laser cleaning of graffiti in Rosa Porrino granite
International Conference on Applications of Optics and Photonics; Braga; Portugal; 3 May 2011 through 7 May 2011
International

Authors María Paula Fiorucci Alsina, Javier Lamas Vigo, Teresa Rivas Brea, Ana Jesús López Díaz, Alberto Ramil Rego
Organization SPIE - The International Society for Optical Engineering
Place Braga (Portugal)

Micromecanizado de vidrio mediante el tercer armónico de un láser Nd:YVO4 de nanosegundo
IX REUNION NACIONAL DE OPTICA
International

Authors Javier Lamas Vigo, Alberto Ramil Rego, Carlos Álvarez-Feal, Ana Jesús López Díaz, Emilio Saavedra Otero, Armando José Yáñez Casal
Place Ourense (España)

Monitoring the laser cleaning process of ornamental granites by means of digital image analysis
International Conference on Lasers in Conservation of Artworks, LACONA VIII
International

Authors Javier Lamas Vigo, Ana Jesús López Díaz, Alberto Ramil Rego, Beatríz Prieto Lamas, Teresa Rivas Brea
Organization National Institute of Research and Development for Optoelectronics. INOE 2000
Place Sibiu (Rumania)

Optimization of laser cleaning parameters for the removal of biological black crusts in granites
International Conference on Lasers in Conservation of Artworks, LACONA VIII
International

Authors Ana Jesús López Díaz, Javier Lamas, Alberto Ramil Rego, Armando José Yáñez Casal, Teresa Rivas Brea, Javier Taboada
Organization National Institute of Research and Development for Optoelectronics. INOE 2000
Place Sibiu (Rumania)

Ensayos por interferometría holográfica de materiales tratados con láser de potencia
IV Conferencia Panamericana de END
International

Authors Alberto Ramil Rego, Ana Jesús López Díaz, Armando José Yáñez Casal, Ginés Nicolás Costa
Place Buenos Aires (Argentina)

Clasificación de cerámicas arqueológicas por espectroscopía LIBS mediante la utilización de redes neuronales artificiales: aplicación a la Terra Sigillata
I Congreso Internacional de Arqueoloxía de Vilalba
National

Authors Alberto Ramil Rego, Ana Jesús López Díaz, Armando José Yáñez Casal
Place Vilalba (España)

La interferometría holográfica como técnica de análisis no destructivo para la detección de defectos estructurales en materiales de interés artístico y/o arqueológico
I Congreso Internacional de Arqueoloxía de Vilalba
National

Authors F. Vincitorio, Alberto Ramil Rego, Ana Jesús López Díaz, Emilio Saavedra Otero, Armando José Yáñez Casal
Place Vilalba (España)

NDT testing by holographic interferometry applied to the structural diagnostic of artwork conservations by means of sound wave excitation
Eighth international conference on vibration measurements by laser techniques: advances and applications.
International

Authors Fabio Vincitorio, Alberto Ramil Rego, Ana Jesús López Díaz, Emilio Saavedra Otero, Armando José Yáñez Casal
Place Ancona (Italia)

Classification of archaeological ceramics by means of laser induced breakdown spectroscopy (LIBS) and artificial neural networks
7th International Conference in the Conservation of Artworks (LACONA VII)
International

Authors Alberto Ramil Rego, Ana Jesús López Díaz, Maria de la Paz Mateo Orenes, Armando José Yáñez Casal
Place Madrid (España)

Colour changes in galician granitic stones induced by UV-Nd:YAG laser irradiation
7th International Conference in the Conservation of Artworks (LACONA VII)
International

Authors Alberto Ramil Rego, Ana Jesús López Díaz, Maria de la Paz Mateo Orenes, Armando José Yáñez Casal, Carlos Álvarez-Feal
Place Madrid (España)

Compositional depth profiles of gilded wood polychromes by means of libs
7th International Conference in the Conservation of Artworks (LACONA VII)
International

Authors Ana Jesús López Díaz, Alberto Ramil Rego, Maria de la Paz Mateo Orenes, Carlos Álvarez-Feal, Armando José Yáñez Casal
Place Madrid (España)

Study of the dependency among geometrical and thermal information from the melt pool in laser surface treatments
Fourth International WLT-Conference on Lasers in Manufacturing..
International

Authors Carlos Álvarez-Feal, Jose Manuel Amado Paz, Javier Lamas Vigo, Alberto Ramil Rego, María José Tobar Vidal, Armando José Yáñez Casal
Place Munich (Alemania)

Monitoring and control of the laser cladding process with diferent sensors
Laser Assisted Net Shape Engineering 5. LANE 2007
International

Authors Jose Manuel Amado Paz, Carlos Álvarez-Feal, Javier Lamas Vigo, Alberto Ramil Rego, María José Tobar Vidal, Armando José Yáñez Casal
Place Erlangen (Alemania)

La espectroscopía LIBS aplicada al análisis y clasificación de cerámicas romanas Terra Sigillata
VII Congreso Ibérico de Arqueometría
National

Authors Ana Jesús López Díaz, Alberto Ramil Rego, Maria de la Paz Mateo Orenes, Víctor Piñón Hermida, Ginés Nicolás Costa, María José Tobar Vidal, Armando José Yáñez Casal
Place Madrid (España)

Improvements in the preparation of cross-sections in cultural heritage materials
XIII Conference of Sociedade Portuguesa de Materiais - IV International Materials Symposium
International

Authors Ana Santaclara Garrido, Carlos Álvarez-Feal, Alberto Ramil Rego, Ana Jesús López Díaz
Place Porto (Portugal)

Application of Artificial Neural Networks for the rapid classification of archeological ceramics by means of Laser Induced Breakdown Spectroscopy (LIBS).
European Materials Research Society, Spring Meeting Symposia (E-MRS 2007
International

Authors Alberto Ramil Rego, Ana Jesús López Díaz, Armando José Yáñez Casal
Place Estrasburgo (Francia)

Análisis de Fourier de sonidos digitalizados utilizando un ordenador y una hoja de cálculo
XXXI Reunión Bienal de la Real Sociedad Española de Física
National

Authors Alberto Ramil Rego, Ana Jesús López Díaz, Emilio Saavedra Otero, Carlos Álvarez-Feal, M. J. Santos
Place Granada (España)

De la clase magistral al modelo ECTS. Innovación y adaptación en las materias de física y mecánica
II Jornadas de Innovación Educativa (EPS). El espacio europeo de educación superior: una oportunidad para las enseñanzas técnicas
National

Authors José Carlos Álvarez Feal, Ana Jesús López Díaz, Ginés Nicolás Costa, Alberto Ramil Rego, Emilio Saavedra Otero
Place Zamora (España)

Corte con láser de acero al Si para núcleos de balastos
IX Congreso Nacional de Materiales, SEMAT
National

Authors José Manuel Amado Paz, Alberto Ramil Rego, María José Tobar Vidal, Armando José Yáñez Casal
Place Vigo (España)

A video based system for the analysis of physical processes
4th International Conference on Physics Teaching in Engineering Education - PTEE 2005
International

Authors Ana Jesús López Díaz, Alberto Ramil Rego, Emilio Saavedra Otero, Carlos Álvarez-Feal, Ginés Nicolás Costa, Armando José Yáñez Casal
Place Brno (República Checa)

Laser Induced Plasma Spectroscopy for the analysis of toman ceramics Terra Sigillata
6th International Conference on Lasers in the Conservation of Artworks LACONA VI
International

Authors Ana Jesús López Díaz, Ginés Nicolás Costa, Maria de la Paz Mateo Orenes, Víctor Piñón Hermida, Alberto Ramil Rego
Place Viena (Austria)

Classification of archaeological pottery by Laser Induced Plasma Spectroscopy
CSI XXXIV - Colloquium Spectroscopicum Internationale XXXIV
International

Authors Ginés Nicolás Costa, Maria de la Paz Mateo Orenes, Alberto Ramil Rego, Víctor Piñón Hermida, Armando José Yáñez Casal
Place Amberes (Bélgica)

Laser technology applied for the analysis of roman pottery terra sigillata
European Materials Research Society, Spring Meeting Symposia (E-MRS 2005)
International

Authors Ginés Nicolás Costa, Maria de la Paz Mateo Orenes, Ana Jesús López Díaz, Alberto Ramil Rego, Víctor Piñón Hermida, Armando José Yáñez Casal
Place Estrasburgo (Francia)

Laser transformation hardening of a tool steel: simulation based parameter optimization and experimental results
European Materials Research Society, Spring Meeting Symposia (E-MRS 2005)
International

Authors María José Tobar Vidal, Carlos Álvarez-Feal, José Manuel Amado Paz, Alberto Ramil Rego, Emilio Saavedra Otero, Armando José Yáñez Casal
Place Estrasburgo (Francia)

Analysis and characterization of archaeological ceramics by laser induced plasma spectroscopy
Materiais 2005
International

Authors Ana Jesús López Díaz, Alberto Ramil Rego, Ginés Nicolás Costa, Maria de la Paz Mateo Orenes, Víctor Piñón Hermida, Armando José Yáñez Casal
Place Aveiro (Portugal)

Laser surface treatment of tool steel
Materiais 2005
International

Authors María José Tobar Vidal, Carlos Álvarez-Feal, José Manuel Amado Paz, Alberto Ramil Rego, Emilio Saavedra Otero, Armando José Yáñez Casal
Place Aveiro (Portugal)

Estimación de la absortividad efectiva en el proceso de endurecimiento de aceros con láser
Segundo Taller Nacional de Procesado de Materiales con Láser
National

Authors María José Tobar Vidal, Carlos Álvarez-Feal, Alberto Ramil Rego, José Manuel Amado Paz
Place España

Cleaning and analysis of fuel from Prestige oil spill by laser technique
Symposium on marine accidental oil spills - VERTIMAR 2005
International

Authors Ginés Nicolás Costa, Maria de la Paz Mateo Orenes, Víctor Piñón Hermida, Carlos Álvarez-Feal, Alberto Ramil Rego, Armando José Yáñez Casal
Place Vigo (España)

Análisis de Cerámicas arqueológicas meidante espectroscopía de plasmas inducidos por láser (LIBS)
XXX Reunión Bienal de la Real Sociedad Española de Física
National

Authors Ana Jesús López Díaz, Ginés Nicolás Costa, Maria de la Paz Mateo Orenes, Víctor Piñón Hermida, Alberto Ramil Rego, Armando José Yáñez Casal
Place Ourense (España)

Experimentos de óptica basados en fotografías digitalizadas
XXX Reunión Bienal de la Real Sociedad Española de Física
National

Authors Ana Jesús López Díaz, Alberto Ramil Rego, Emilio Saavedra Otero, Carlos Álvarez-Feal, Ginés Nicolás Costa, Armando José Yáñez Casal
Place Ourense (España)

Las prácticas de laboratorio en los Fundamentos Físicos de la Ingeniería
3rd Congreso Internacional de Docencia Universitaria e Innovación
International

Authors Ana Jesús López Díaz, Alberto Ramil Rego, Armando José Yáñez Casal, Carlos Álvarez-Feal, Emilio Saavedra Otero, Ginés Nicolás Costa
Place Girona (España)

Prácticas de física con un ordenador multimedia
3rd Congreso Internacional de Docencia Universitaria e Innovación
International

Authors Ana Jesús López Díaz, Alberto Ramil Rego, Armando José Yáñez Casal, Carlos Álvarez-Feal, Emilio Saavedra Otero, Ginés Nicolás Costa
Place Girona (España)

Laser hardening simulation with finite element method: an analysis of the errors introduced by the discretization
4th European Congress on Computational Methods in Applied Sciences and Engineering - ECCOMAS 2004
International

Authors Emilio Saavedra Otero, Alberto Ramil Rego, Carlos Álvarez-Feal, José Manuel Amado Paz, Ana Jesús López Díaz, Josefa Sanesteban Raposo, María José Tobar Vidal, Armando José Yáñez Casal
Place Jyväskylä (Finlandia)

Aplicación del análisis dimensional a la simulación de procesos de temple con láser: elección de parámetros de proceso y estimación de errores
Congresso de Métodos Computacionais em Engenharia
International

Authors Alberto Ramil Rego, Carlos Álvarez-Feal, José Manuel Amado Paz, Ana Jesús López Díaz, Ginés Nicolás Costa, Emilio Saavedra Otero, Josefa Sanesteban Raposo, María José Tobar Vidal, Armando José Yáñez Casal
Place Lisboa (Portugal)

Aplicación del método LTDRM en la modelización del procesado de materiales con láser
Congresso de Métodos Computacionais em Engenharia
International

Authors José Manuel Amado Paz, Carlos Álvarez-Feal, Ginés Nicolás Costa, Ana Jesús López Díaz, Alberto Ramil Rego, Emilio Saavedra Otero, María José Tobar Vidal, Armando José Yáñez Casal
Place Lisboa (Portugal)

Application of the LT-DRBEM method in laser process modelling
17Th Meeting on Mathematical Modelling of Materials Processing with lasers
International

Authors José Manuel Amado Paz, Ginés Nicolás Costa, Alberto Ramil Rego, María José Tobar Vidal, Armando José Yáñez Casal
Place Igls-Innsbruck (Austria)

Laser cleaning: an alternative method for removing oil-spill fuel residues
International Symposium of European Materials Research Society Spring Meeting (E-MRS
International

Authors Maria de la Paz Mateo Orenes, Ginés Nicolás Costa, Victor Piñón Hermida, Alberto Ramil Rego, Armando José Yáñez Casal
Place Estrasburgo (Francia)

Methods of control and evaluation of laser painting removal process in naval sector
International Symposium of European Materials Research Society Spring Meeting (E-MRS
International

Authors Ginés Nicolás Costa, Maria de la Paz Mateo Orenes, Victor Piñón Hermida, Alberto Ramil Rego, Armando José Yáñez Casal
Place Estrasburgo (Francia)

Un Laboratorio Virtual de Física basado en el análisis de archivos multimedia
IV Congreso Internacional Virtual de Educación
International

Authors Ana Jesús López Díaz, Alberto Ramil Rego, Carlos Álvarez-Feal, Emilio Saavedra Otero, Josefa Sanesteban Raposo
Place España

A simulation based scheme for parameter process selection in laser surface treatments
Laser Assisted Net Shape Engineering 4
International

Authors Carlos Álvarez-Feal, José Manuel Amado Paz, Ana Jesús López Díaz, Ginés Nicolás Costa, Alberto Ramil Rego, Emilio Saavedra Otero, María José Tobar Vidal, Armando José Yáñez Casal
Place Erlangen (Alemania)

Compositional analysis of Hispanic Terra Sigillata by laser spectroscopy
Third international conference on laser induced plasma spectroscopy and applications
International

Authors Ana Jesús López Díaz, Ginés Nicolás Costa, Maria de la Paz Mateo Orenes, Victor Piñón Hermida, María José Tobar Vidal, Alberto Ramil Rego
Place Málaga (España)

Laser-induced plasma monitoring for the control of oil-spill fuel removal by laser ablation
Third international conference on laser induced plasma spectroscopy and applications
International

Authors Maria de la Paz Mateo Orenes, Ginés Nicolás Costa, Victor Piñón Hermida, Carlos Álvarez-Feal, Alberto Ramil Rego, Armando José Yáñez Casal
Place Málaga (España)

Caracterización de cerámicas antiguas mediante espectroscopía de plasmas inducidos por láser: aplicación al caso de "Terra Sigillata" Hispánica
XLIV Congreso de la Sociedad Española de Cerámica y Vidrio
National

Authors Ginés Nicolás Costa, Maria de la Paz Mateo Orenes, Ana Jesús López Díaz, Alberto Ramil Rego, Victor Piñón Hermida, Armando José Yáñez Casal
Place Vigo (España)

Estudio comparativo de cerámicas romanas "Terra Sigillata" procedentes de distintos centros de producción
XLIV Congreso de la Sociedad Española de Cerámica y Vidrio
National

Authors Ana Jesús López Díaz, Alberto Ramil Rego, Maria de la Paz Mateo Orenes, Victor Piñón Hermida, Ginés Nicolás Costa
Place Vigo (España)

Modelling of the surface properties in Laser Heat Treatments
TMT 2003. Trends in the Development of Machinery and Associated Technology
International

Authors Armando José Yáñez Casal, José Manuel Amado Paz, Carlos Álvarez-Feal, Ginés Nicolás Costa, Ana Jesús López Díaz, Jose Antonio Pérez Rodríguez, Alberto Ramil Rego, Emilio Saavedra Otero, Josefa Sanesteban Raposo, María José Tobar Vidal
Place Lloret de Mar (España)

Desarrollo de un modelo de endurecimiento de aceros por láser
XXIX Bienal de Física y Química
National

Authors José Manuel Amado Paz, Josefa Sanesteban Raposo, Emilio Saavedra Otero, Alberto Ramil Rego, Ana Jesús López Díaz, Carlos Álvarez-Feal, María José Tobar Vidal, Armando José Yáñez Casal, Ginés Nicolás Costa
Place Madrid (España)

Optimización del recorrido y de la potencia de un haz láser de CO2 en el tratamiento térmico de válvulas de motores diesel
IX Congreso de Ciencia y Tecnología Metalúrgicas CTM 2003
National

Authors Armando José Yáñez Casal, Jose Manuel Amado Paz, Carlos Álvarez-Feal, Ana Jesús López Díaz, Ginés Nicolás Costa, Alberto Ramil Rego, Emilio Saavedra Otero, Josefa Sanesteban Raposo, María José Tobar Vidal
Place Madrid (España)

Modelización de las transformaciones de fase en el proceso de endurecimiento de aceros con láser de CO2
IX Congreso de Ciencia y Tecnología Metalúrgicas CTM 2003
National

Authors Armando José Yáñez Casal, Carlos Álvarez-Feal, Emilio Saavedra Otero, Josefa Sanesteban Raposo, Jose Manuel Amado Paz, Ana Jesús López Díaz, Alberto Ramil Rego, María José Tobar Vidal, Ginés Nicolás Costa
Place Madrid (España)

Laser cleaning of tools and rocks polluted by oil spill from Prestige tanker
VIII International Symposium on Analytical Methodology in the Environmental Field (VIII ISAMEF)
International

Authors Mari Paz Mateo Orenes, Ginés Nicolás Costa, Victor Piñón Hermida, Carlos Álvarez-Feal, Alberto Ramil Rego, Armando José Yáñez Casal
Place Coruña, A (España)

Virtual Laboratory of Physics
Physics on Stage
International

Authors Alberto Ramil Rego, Armando José Yáñez Casal, Ana Jesús López Díaz, Carlos Álvarez-Feal, Ginés Nicolás Costa, Emilio Saavedra Otero, Jose Antonio Pérez Rodríguez, Josefa Sanesteban Raposo
Place Noordwijk (Países Bajos)

Desarrollo de un laboratorio virtual de física
XXIX Reunión Bienal de la Real Sociedad Española de Física
National

Authors Alberto Ramil Rego, Armando José Yáñez Casal, Ana Jesús López Díaz, Carlos Álvarez-Feal, Ginés Nicolás Costa, Emilio Saavedra Otero, Jose Antonio Pérez Rodríguez, Josefa Sanesteban Raposo
Place Madrid (España)

Laboratorio virtual de Física
Física en Acción
National

Authors Alberto Ramil Rego, Armando José Yáñez Casal, Ana Jesús López Díaz, Carlos Álvarez-Feal, Ginés Nicolás Costa, Emilio Saavedra Otero, Jose Antonio Pérez Rodríguez, Josefa Sanesteban Raposo
Place España

Prediction of Temperatura Evolution on Metals During Láser Hardening Process.
E-MRS Spring Meeting 2001.
International

Authors Armando José Yáñez Casal, Ana Jesús López Díaz, Ginés Nicolás Costa, Jose Antonio Pérez Rodríguez, Alberto Ramil Rego, Emilio Saavedra Otero, José Carlos Álvarez Feal
Place Strasbourg (Francia)

Optical and Acoustic Techniques Combination in Cleaning Process.
E-MRS Spring Meeting 2001.
International

Authors Armando José Yáñez Casal, Ginés Nicolás Costa, Alberto Ramil Rego, Michel Autric
Place Strasbourg (Francia)

Real Time Control and Monitoring of Laser Hardening Process: Aplication to Cylindrical Workpieces.
3 International Conference on Laser Assisted Net Shape Engineering 3.
International

Authors Armando José Yáñez Casal, Ana Jesús López Díaz, Ginés Nicolás Costa, Jose Antonio Pérez Rodríguez, Alberto Ramil Rego, Emilio Saavedra Otero, José Luis Ocaña Moreno, José Carlos Álvarez Feal
Place Erlangen (Alemania)

Modificaciones Superficiales en Materiales Cerámicos por Irradiación Láser.
Congreso Anual de la Sociedad Española de Cerámica y Vidrio.
International

Authors Ginés Nicolás Costa, Alberto Ramil Rego, Armando José Yáñez Casal, José Carlos Álvarez Feal
Place Málaga (España)

Predicción numérica del endurecimiento superficial de aceros procesados con láser.
Reunión Bienal de la Real Sociedad Española de Física.
International

Authors Armando José Yáñez Casal, Ana Jesús López Díaz, Ginés Nicolás Costa, Alberto Ramil Rego, Emilio Saavedra Otero, Josefa Sanesteban Raposo, José Manuel Amado Paz, José Carlos Álvarez Feal
Place Sevilla (España)

Tratamiento superficial de materiales metálicos por láser.
Reunión Bienal de la Real Sociedad Española de Física.
International

Authors Armando José Yáñez Casal, Ana Jesús López Díaz, Ginés Nicolás Costa, Jose Antonio Pérez Rodríguez, Alberto Ramil Rego, Emilio Saavedra Otero, Josefa Sanesteban Raposo, José Manuel Amado Paz, José Carlos Álvarez Feal
Place Sevilla (España)

Una asignatura de libre configuración sobre las bses mecánicas del movimiento humano y su aplicación a los deportes.
11 Encuentro Ibérico para la enseñanza de la Física.
International

Authors Ana Jesús López Díaz, Alberto Ramil Rego, Emilio Saavedra Otero, José Carlos Álvarez Feal
Place Sevilla (España)

Del oscilador armónico a las ondas.
6 Congreso Internacional sobre Investigación en la Didáctica de las Ciencias.
International

Authors Alberto Ramil Rego, Ana Jesús López Díaz, Emilio Saavedra Otero, Josefa Sanesteban Raposo, José Carlos Álvarez Feal
Place Barcelona (España)

Predicción de la evolución de la temperatura durante el tratamiento térmico de materiales metálicos por láser
XIV Congreso Nacional de Ingeniería Mecánica
National

Authors Emilio Saavedra Otero, Ana Jesús López Díaz, Alberto Ramil Rego, Armando José Yáñez Casal
Place Madrid (España)

Surface treatment of metals and ceramics with excimer lasers
13th Meeting on Mathematical Modeling of Materials Procesing with Lasers
International

Authors Ginés Nicolás Costa, Alberto Ramil Rego, Emilio Saavedra Otero, Armando José Yáñez Casal, José Luis Ocaña Moreno, Michel Autric, Ángel García Beltrán, Carlos Molpeceres Álvarez, Miguel Morales
Place Viena (Austria)

UV laser surface processing of metallic alloys:comparison of experimental and numerical results.
E-MRS¿98 European Materials Research Society Spring Meeting
International

Authors Ginés Nicolás Costa, Armando José Yáñez Casal, Alberto Ramil Rego, Carlos Álvarez-Feal, Emilio Saavedra Otero, José Luis Ocaña Moreno, Ángel García Beltrán, Carlos Molpeceres Álvarez, Michel Autric
Place Estrasburgo (Francia)

A 3D Model for the Predictive Assessment of Laser Surface Treatments
6th International Conference on Welding and Melting by Electron and Laser Beams (CISFFEL)
International

Authors Ginés Nicolás Costa, José Luis Ocaña Moreno, Ángel García Beltrán, J.A. Muñoz, Armando José Yáñez Casal, Alberto Ramil Rego, E. Saavedra
Place Toulon (Francia)

Simulación numérica de procesos de tratamiento térmico superficial de materiales con láser
5 Reunión Nacional de Óptica
National

Authors José Luis Ocaña Moreno, Armando José Yáñez Casal, Alberto Ramil Rego, Ana Jesús López Díaz, Carlos Álvarez-Feal, Emilio Saavedra Otero
Place Valencia (España)

Procesado industrial de materiales con láseres de potencia
Foro Tecnológico de Galicia -Oferta Tecnológica de la Universidad de La Coruña
Autonomous

Authors José Luis Ocaña Moreno, Armando José Yáñez Casal, Alberto Ramil Rego, Carlos Álvarez-Feal, Ana Jesús López Díaz
Place Ferrol (España)

Una experiencia para analizar las dificultades en el aprendizaje de Física en las Escuelas de Ingeniería
II Jornadas Nacionales de Innovación en las Enseñanzas de las Ingenierias.
National

Authors Ana Jesús López Díaz, Alberto Ramil Rego, Armando José Yáñez Casal, José Luis Ocaña Moreno, Carlos Álvarez-Feal
Place Madrid (España)

Positions

Academic or management positions held by teacher.

Consello do Departamento Enxeñaría Naval e Industrial

PDI (Membros Natos)

From 15/03/2023.

Xunta da Escola Politécnica de Enxeñaría de Ferrol

PDI (Membros Natos)

From 15/03/2023.

Comisión Permanente de la EIDUDC

Ärea de Ingeniería Arquitectura
Representantes áreas

From 25/05/2021.

Comité de Dirección de la EIDUDC

Coordinador

From 01/11/2017.

Comisión Académica Programa Oficial de Doctorado en Ingeniería Naval e Industrial

Coordinador

From 01/11/2017.

Xunta da Escola Politécnica de Enxeñaría de Ferrol

PDI (Membros Natos)

From 04/11/2021 to 14/03/2023.

Xunta da Escola Politécnica Superior

PDI (Membros Natos)

From 10/03/2021 to 03/11/2021.

Consello do Departamento Enxeñaría Naval e Industrial

PDI (Membros Natos)

From 10/03/2021 to 14/03/2023.

Coordinadores/as Másteres Escuela Politécnica Superior

Cambios - MU en Ingeniería Industrial y MU en Ingeniería Naval y Oceánica (18/07/2016)

From 01/10/2015 to 08/05/2017.

Profesorado responsable titulaciones Escuela Politécnica Superior

(6) Grados en Arquitectura Naval; Tecnologías Industriales; Ing. de Prop. y Serv. del Buque; Ing. Naval y Oceánica; Ing. Mecánica; Prog. Simult. Ing. Mecánica e Ing. Naval y Oceánica
Profesor responsable de titulación

From 01/10/2015 to 30/09/2017.

Comisión Académica Programa Oficial de Doctorado en Láser, Fotónica y Visión

Vocal PDI

From 11/10/2013 to 31/10/2017.

Coordinadores/as Másteres Escuela Politécnica Superior

Máster Universitario en Ingeniería Industrial y Master Universitario en Ingeniería Naval y Oceánica

From 01/10/2013 to 30/09/2015.

Escuela Politécnica Superior

Director

From 11/04/2013 to 19/04/2017.

Escuela Politécnica Superior

Director

From 18/03/2009 to 10/04/2013.

Escuela Politécnica Superior

Subdirector