Una ruta universal por el Campus Industrial de Ferrol
| Funding entity | Fundación Española para la Ciencia y la Tecnología (FECYT) |
| Main researches | ARES PERNAS, ISABEL |
| Type | Proyecto Otros Programas |
| Dates | From 01/07/2024 to 30/06/2026 |
| Department | Naval and Industrial Engineering |
| Knowledgment area | Fluid Mechanics |
| Research | Research group Grupo Integrado de Ingeniería |
| Research lines | Fluid dynamics, turbulence, aerodynamic design, signal processing, instrumentation, multiphase flow |
| Keywords | Fluid dynamics, turbulence, CFD, aerodynamic design, signal processing, instrumentation, multiphase flow , aerospace propulsion. |
| Contacto | UDC directory |
| Orcid id0000-0003-3669-6436 ResearcherIDAAA-4302-2019 Scopus16318925400 | |
This section shows the teaching given in degrees, masters and other officers studies in last 6 years.
| Subject and involved studies | Type | Distance hours | Total hours |
|---|---|---|---|
| Capstone Design I | Optional | 0 | 6 |
| Capstone Design II | Optional | 0 | 6 |
| Capstone Design II | Optional | 0 | 6 |
| Final Year Dissertation | Compulsory | 0 | 4.5 |
| Final Year Dissertation | Compulsory | 0 | 1.5 |
| Finite Volume Method in CFD | Optional | 0 | 29.5 |
|
Fluid and Thermal Machines
Complementos de Formación previos para el M.U. en Ingeniería Industrial
|
Compulsory | 0 | 20 |
| Fluid and Thermal Machines | Compulsory | 0 | 20 |
| Introduction to Marine Computational Fluid Dynamics (CFD) | Compulsory | 0 | 21 |
| Master's Dissertation | Compulsory | 0 | 0.5 |
| Simulation Process in CFD | Optional | 0 | 2 |
| Work Placement | Optional | 0 | 1 |
| Work Placement | Compulsory | 0 | 0.75 |
| Subject and involved studies | Type | Distance hours | Total hours |
|---|---|---|---|
|
Capstone Design I
Degree in Mechanical Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
|
Optional | 0 | 6 |
|
Capstone Design I
Degree in Industrial Technology Engineering
|
Optional | 0 | 8 |
|
Capstone Design II
Degree in Mechanical Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
|
Optional | 0 | 3 |
|
Capstone Design II
Degree in Industrial Technology Engineering
|
Optional | 0 | 3 |
|
Final Year Dissertation
Degree in Mechanical Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
|
Compulsory | 0 | 4 |
|
Final Year Dissertation
Degree in Industrial Technology Engineering
|
Compulsory | 0 | 7.5 |
|
Finite Volume Method in CFD
Master in Industrial Engineering
Master in Industrial Engineering
|
Optional | 0 | 29.5 |
|
Fluid and Thermal Machines
Complementos de Formación previos para el M.U. en Ingeniería Industrial
Degree in Mechanical Engineering
|
Compulsory | 0 | 28 |
|
Fluid and Thermal Machines
Degree in Industrial Technology Engineering
|
Compulsory | 0 | 20 |
|
Fluid Mechanics
Complementos de Formación previos para el M.U. en Ingeniería Naval y Oceánica
Degree in Naval Architecture and Ocean Engineering
|
Compulsory | 0 | 10 |
|
Fluid Mechanics
Automation and Industrial Electronics Engineering
Degree in Electrical Engineering
|
Compulsory | 0 | 10 |
|
Fluid Mechanisc
Complementos de Formación previos para el M.U. en Ingeniería Industrial
Degree in Industrial Technology Engineering
Degree in Mechanical Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
|
Compulsory | 0 | 10 |
|
Introduction to Marine Computational Fluid Dynamics (CFD)
Erasmus Mundus Master Degree Sustainable Ship and Shipping 4.0
|
Compulsory | 0 | 21 |
|
Master's Dissertation
Master in Naval Architecture and Ocean Engineering
|
Compulsory | 0 | 1 |
|
Master's Dissertation
Master in Industrial Engineering
|
Compulsory | 0 | 11 |
|
Simulation Process in CFD
Master in Industrial Engineering
Master in Industrial Engineering
|
Optional | 0 | 2 |
|
Work Placement
Degree in Industrial Technology Engineering
|
Optional | 0 | 13 |
| Subject and involved studies | Type | Distance hours | Total hours |
|---|---|---|---|
|
Capstone Design II
Degree in Mechanical Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
|
Optional | 0 | 5 |
|
Capstone Design II
Degree in Industrial Technology Engineering
|
Optional | 0 | 5 |
|
Final Year Dissertation
Degree in Mechanical Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
|
Compulsory | 0 | 4 |
|
Final Year Dissertation
Degree in Industrial Technology Engineering
|
Compulsory | 0 | 8 |
|
Finite Volume Method in CFD
Master in Industrial Engineering
Master in Industrial Engineering
|
Optional | 0 | 29.5 |
|
Fluid and Thermal Machines
Complementos de Formación previos para el M.U. en Ingeniería Industrial
Degree in Mechanical Engineering
|
Compulsory | 0 | 28 |
|
Fluid and Thermal Machines
Degree in Industrial Technology Engineering
|
Compulsory | 0 | 20 |
|
Fluid Mechanics
Complementos de Formación previos para el M.U. en Ingeniería Naval y Oceánica
Degree in Naval Architecture and Ocean Engineering
|
Compulsory | 0 | 5 |
|
Fluid Mechanics
Automation and Industrial Electronics Engineering
Degree in Electrical Engineering
|
Compulsory | 0 | 10 |
|
Fluid Mechanisc
Complementos de Formación previos para el M.U. en Ingeniería Industrial
Degree in Industrial Technology Engineering
Degree in Mechanical Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
|
Compulsory | 0 | 5 |
|
Introduction to Marine Computational Fluid Dynamics (CFD)
Erasmus Mundus Master Degree Sustainable Ship and Shipping 4.0
|
Compulsory | 0 | 21 |
|
Simulation Process in CFD
Master in Industrial Engineering
Master in Industrial Engineering
|
Optional | 0 | 2 |
| Subject and involved studies | Type | Distance hours | Total hours |
|---|---|---|---|
|
Capstone Design I
Degree in Mechanical Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
|
Optional | 0 | 20 |
|
Capstone Design I
Degree in Industrial Technology Engineering
|
Optional | 0 | 20 |
|
Capstone Design II
Degree in Mechanical Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
|
Optional | 0 | 13 |
|
Capstone Design II
Degree in Industrial Technology Engineering
|
Optional | 0 | 13 |
|
Final Year Dissertation
Degree in Industrial Technology Engineering
|
Compulsory | 0 | 4 |
|
Finite Volume Method in CFD
Master in Industrial Engineering
Master in Industrial Engineering
|
Optional | 0 | 28.5 |
|
Fluid and Thermal Machines
Complementos de Formación previos para el M.U. en Ingeniería Industrial
Degree in Mechanical Engineering
|
Compulsory | 0 | 28 |
|
Fluid and Thermal Machines
Degree in Industrial Technology Engineering
|
Compulsory | 0 | 20 |
|
Introduction to Marine Computational Fluid Dynamics (CFD)
Erasmus Mundus Master Degree Sustainable Ship and Shipping 4.0
|
Compulsory | 0 | 21 |
|
Master's Dissertation
Master in Industrial Engineering
|
Compulsory | 0 | 5 |
|
Simulation Process in CFD
Master in Industrial Engineering
Master in Industrial Engineering
|
Optional | 0 | 3 |
| Subject and involved studies | Type | Distance hours | Total hours |
|---|---|---|---|
|
Capstone Design I
Degree in Mechanical Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
|
Optional | 0 | 19 |
|
Capstone Design I
Degree in Industrial Technology Engineering
|
Optional | 0 | 19 |
|
Final Year Dissertation
Degree in Industrial Technology Engineering
|
Compulsory | 0 | 4 |
|
Finite Volume Method in CFD
Master in Industrial Engineering
|
Optional | 0 | 30 |
|
Fluid and Thermal Machines
Complementos de Formación previos para el M.U. en Ingeniería Industrial
Degree in Mechanical Engineering
|
Compulsory | 0 | 20 |
|
Fluid and Thermal Machines
Degree in Industrial Technology Engineering
|
Compulsory | 0 | 20 |
|
Fluid Mechanics
Automation and Industrial Electronics Engineering
Degree in Electrical Engineering
|
Compulsory | 0 | 57 |
|
Fluid Mechanisc
Complementos de Formación previos para el M.U. en Ingeniería Industrial
Degree in Industrial Technology Engineering
Degree in Mechanical Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
|
Compulsory | 0 | 30 |
|
Simulation Process in CFD
Master in Industrial Engineering
|
Optional | 0 | 2 |
| Subject and involved studies | Type | Distance hours | Total hours |
|---|---|---|---|
|
Capstone Design I
Degree in Industrial Technology Engineering
|
Optional | 0 | 21 |
|
Capstone Design I
Degree in Mechanical Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
|
Optional | 0 | 21 |
|
Computational Methods for Continuous Media
Master in Industrial Engineering
|
Optional | 0 | 1 |
|
Final Year Dissertation
Degree in Industrial Technology Engineering
|
Compulsory | 0 | 4 |
|
Finite Volume Method in CFD
Master in Industrial Engineering
|
Optional | 0 | 14 |
|
Fluid and Thermal Machines
Complementos de Formación previos para el M.U. en Ingeniería Industrial
Degree in Mechanical Engineering
|
Compulsory | 0 | 20 |
|
Fluid and Thermal Machines
Degree in Industrial Technology Engineering
|
Compulsory | 0 | 20 |
|
Fluid Mechanics
Automation and Industrial Electronics Engineering
Degree in Electrical Engineering
|
Compulsory | 0 | 39 |
|
Fluid Mechanisc
Complementos de Formación previos para el M.U. en Ingeniería Industrial
Degree in Industrial Technology Engineering
Degree in Mechanical Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
|
Compulsory | 0 | 60 |
|
Simulation Process in CFD
Master in Industrial Engineering
|
Optional | 0 | 10 |
Defined tutoring by teacher for 2024/2025 academic course.
| Quarter | Day | Site |
|---|---|---|
| 1st quarter |
Monday
12:30 a 15:30 |
Despacho 10 (Talleres Tecnolóxicos) |
| 1st quarter |
Wednesday
12:30 a 15:30 |
Despacho 10 (Talleres Tecnolóxicos) |
| 2nd quarter |
Monday
12:30 a 15:30 |
Despacho 10 (Talleres Tecnolóxicos) |
| 2nd quarter |
Wednesday
12:30 a 15:30 |
Despacho 10 (Talleres Tecnolóxicos) |
Directed or codirected by current teacher since 2013 year.
| Characterization of the fishing nets deformation using optical tools |
| Development of a scaled model of an offshore floating platform and its associated wind-induced excitation simulation system, for the study of its dynamic behavior during operation. |
| CFD simulation of fishing nets |
| Prototype for measuring the drag force in a wind tunnel |
| Design and construction of a work bench to characterize the formation of rivulets in a liquid film |
| Flow characterisation in an orifice plate |
| Assessment of a new methodology for the CFD simulation of the industrial wood the drying process |
| CFD study of the airflow in a batch wood drying kiln |
| Caracterization of a Buterfly Valve in the Hydraulic Test Bench |
| Numerical Study of the Jet-Wiping Process in Galvanization |
Select merit type and year to query research merits.
Una ruta universal por el Campus Industrial de Ferrol
| Funding entity | Fundación Española para la Ciencia y la Tecnología (FECYT) |
| Main researches | ARES PERNAS, ISABEL |
| Type | Proyecto Otros Programas |
| Dates | From 01/07/2024 to 30/06/2026 |
Vehículos autónomos submarinos para el mantenimiento de estructuras de Energías Renovables Marinas
| Funding entity | Ministerio de Ciencia e Innovación |
| Main researches | Vicente Díaz Casás (IP1) / Álvaro Deibe Díaz (IP2) |
| Type | Proyecto Programas Nacionales |
| Dates | From 01/12/2022 to 30/11/2024 |
Digitalización de plataformas de despegue/aterrizaje de sistemas aéreos no tripulados aplicados al mantenimiento de parques eólicos offshore
| Funding entity | Ministerio de Ciencia e Innovación |
| Main researches | Marcos Míguez González (IP1) / Anne Marie Elisabeth Gosset (IP2) |
| Type | Proyecto Programas Nacionales |
| Dates | From 01/12/2022 to 30/11/2024 |
ASISTENCIA TECNICA EN EL DESARROLLO DEL PROYECTO REPERA 2
| Funding entity | CT Ingenieros A.A.I., S.L. |
| Main researches | Vicente Díaz Casás |
| Type | Contrato |
| Dates | From 01/11/2022 to 30/06/2023 |
Evolución del cocurado en materiales preimpregnados
| Funding entity | Centro para el Desarrollo Tecnológico e Industrial (CDTI) |
| Main researches | Anne Gosset, Marcos Lema Rodríguez |
| Type | Proyecto Programas Nacionales |
| Dates | From 01/11/2022 to 31/12/2024 |
AXUDAS PARA A CONSOLIDACIÓN E ESTRUTURACIÓN DE UNIDADES DE INVESTIGACIÓN COMPETITIVAS.GRC 2021
| Funding entity | Consellería de Cultura, Educación e Ordenación Universitaria |
| Main researches | Richard Duro Fernández |
| Type | Proyecto Programas Autonomicos |
| Dates | From 01/01/2021 to 20/11/2024 |
ASISTENC IA TECNICA PARA LA SIMULACION Y VALIDAC ION EXPERIMENTA L EN EL DISEÑO DE UN DISPOSITIVO PARA LA CONTENCION DE PLASTICOS EN RIOS
| Funding entity | CT Ingenieros A.A.I., S.L. |
| Main researches | Vicente Díaz Casás |
| Type | Contrato |
| Dates | From 01/10/2021 to 28/02/2022 |
Simulación de la interacción fluido-estructura en redes de pesca
| Funding entity | Ministerio de Ciencia e Innovación |
| Main researches | Manuel Jesús González Castro, Marcos Lema Rodriguez |
| Type | Proyecto Programas Nacionales |
| Dates | From 01/06/2020 to 31/05/2023 |
Adiabatic Decomposition of Propellants
| Funding entity | Agencia Espacial Europea/European Space Agency (ESA) |
| Main researches | Marcos Lema Rodríguez |
| Type | Proyecto Internacional |
| Dates | From 21/12/2020 to 04/07/2022 |
High-fidelity CFD investigation of the jet wiping process
| Funding entity | INSTITUT VON KARMAN DE DYNAMIQUE DES FLUIDES (IVKDF) |
| Main researches | Anne Gosset |
| Type | Contrato |
| Dates | From 01/05/2020 to 30/04/2022 |
Simulación del flujo de aire en proceso de fabricación mediante Computational Fluid Dynamics (CFD)
| Funding entity | Financiera Maderera S.A., FINSA |
| Main researches | Anne Gosset, Marcos Lema |
| Type | Contrato |
| Dates | From 04/07/2019 to 04/10/2020 |
Axudas para a consolidación e estruturación de unidades de investigación competitivas-GRC
| Funding entity | Consellería de Cultura, Educación e Ordenación Universitaria |
| Main researches | Richard J. Duro Fernández |
| Type | Proyecto Programas Autonomicos |
| Dates | From 01/01/2017 to 31/12/2020 |
RedTEIC (Red Temática en Tecnologías Emergentes de la Información y de las Comunicaciones )
| Funding entity | Xunta de Galicia. Ayudas de consolidación y estructuración de unidades de investigación competitivas del SUG. Modalidad C: Redes |
| Main researches | Luis Castedo Ribas |
| Type | Proyecto Programas Autonomicos |
| Dates | From 01/01/2017 to 31/12/2018 |
Simulación Agitador de Reactor
| Funding entity | FORESA, INDUSTRIAS QUÍMICAS DEL NOROESTE, S.A. |
| Main researches | Marcos Lema Rodríguez |
| Type | Contrato |
| Dates | From 04/01/2017 to 03/05/2017 |
Axuda do programa de consolidación e estructuración de unidades de investigación competitivas
| Funding entity | Xunta de Galicia |
| Main researches | Richard J. Duro Fernández |
| Type | Proyecto Programas Autonomicos |
| Dates | From 01/01/2013 to 31/12/2016 |
Axudas para proxectos de investigación desenvolvidos por investigadores emerxentes
| Funding entity | Xunta de Galicia |
| Main researches | Anne Marie Elisabeth Gosset |
| Type | Proyecto Programas Autonomicos |
| Dates | From 01/01/2013 to 31/12/2016 |
CONTRATO DE INVESTIGACIÓN PARA O PROXECTO "DISEÑO Y DESARROLLO, ESTRUCTURAL Y DE SISTEMA, MEDIANTE EL USO DE HERRAMIENTAS CAD, FEA Y CFD, DE UN PROTOTIPO DE DRAGA ECOLÓGICA PARA LA LIMPIEZA POR SUCCIÓN DE FONDOS MARINOS" NO PROGRAMA INNTERCONECTA 201
| Funding entity | NODOSA |
| Main researches | Anne Gosset |
| Type | Contrato |
| Dates | From 01/01/2012 to 01/01/2013 |
Laser texturation for drag reduction (Latexdred)
| Funding entity | Union Europea |
| Main researches | Fernando López Peña |
| Type | Proyecto Programas Autonomicos |
| Dates | From 01/10/2010 to 31/12/2013 |
Deseño dunha boia flotante para xeración de enerxía eólica offshore
| Funding entity | Xunta de Galicia |
| Main researches | Fernando López Peña |
| Type | Proyecto Programas Autonomicos |
| Dates | From 01/01/2010 to 30/09/2013 |
Liquid Column Separation Due to Fluid Hammer Occurrence in Propellant Lines
| Authors | M. Lema, Anne Gosset, Fernando López Peña, J. Steelant |
| Journal | JOURNAL OF PROPULSION AND POWER Vol. 39 Num. 1 (pages 121 to 129) |
| DOI | https://doi.org/10.2514/1.b38451 |
Experimental and Numerical Investigation of the Extrusion and Deposition Process of a Poly(lactic Acid) Strand with Fused Deposition Modeling
| Authors | Anne Gosset, David Barreiro-Villaverde, Juan Carlos Becerra Permuy, M. Lema, Ana Ares-Pernas, Abad-López, M.J. |
| Journal | POLYMERS Vol. 12 Num. 12 (pages 1 to 20) |
| DOI | https://doi.org/10.3390/polym12010005 |
Influence of Gas Desorption in a Safety Relief Valve Undergoing Cavitation
| Authors | M. Lema, Anne Gosset, Fernando López Peña |
| Journal | International Journal of Fluid Machinery and Systems Vol. 12 Num. 4 (pages 451 to 458) |
| DOI | https://doi.org/10.5293/ijfms.2019.12.4.451 |
Analysis of fluid hammer occurrence with phase change and column separation due to fast valve opening by means of flow visualization
| Authors | M. Lema, Fernando López Peña, J-M. Buchlin, Patrick Rambaud, Johan Steelant |
| Journal | EXPERIMENTAL THERMAL AND FLUID SCIENCE Vol. 79 (pages 143 to 153) |
| DOI | https://doi.org/10.1016/j.expthermflusci.2016.07.008 |
Fluid hammer with gas desorption in a liquid-filling tube: experiments with three different liquids
| Authors | M. Lema, Fernando Peña López, Patrick Rambaud, J.-M. Buchlin, Johan Steelant |
| Journal | EXPERIMENTS IN FLUIDS Vol. 56 Num. 9 (pages 1 to 12) |
| DOI | https://doi.org/10.1007/s00348-015-2043-2 |
Experimental and Numerical Multiphase-Front Fluid Hammer
| Authors | P. Porca, M. Lema, P. Rambaud, Johan Steelant |
| Journal | JOURNAL OF PROPULSION AND POWER Vol. 30 Num. 2 (pages 368 to 376) |
Multiphase Investigation of Water Hammer Phenomenon Using the Full Cavitation Model
| Authors | J. Pinho, M. Lema, P. Rambaud, Johan Steelant |
| Journal | JOURNAL OF PROPULSION AND POWER Vol. 30 Num. 1 (pages 105 to 113) |
| DOI | https://doi.org/10.2514/1.b34833 |
A New Approach to Laminar Flowmeters
| Authors | Fernando López Peña, Álvaro Deibe Díaz, M. Lema, Santiago Vázquez Rodríguez |
| Journal | Sensors Vol. 10 (pages 10560 to 10570) |
Mejora docente e incremento de la visibilidad en la ingeniería naval e industrial a través del uso de instalaciones experimentales
| Authors | Marcos Miguez Gonzalez. Anne Gosset. Vicente Díaz. M. Lema. Lucía Santiago Caamaño |
| Book |
Contextos universitarios transformadores: boas prácticas no marco dos GID. IV Xornadas de Innovación Docente Publishing: Universidade da Coruña. ISBN: 978-84-9749-775-6 |
| Pages | From 405 to 419 |
Modelos numéricos para la simulación de flujos gas-líquido en el proceso de galvanización
| Autor | David Barreiro Villaverde |
| Director/s | Anne Marie Elisabeth Gosset; Marcos Lema Rodríguez |
| Scope | Escuela Politécnica de Ingeniería de Ferrol |
| Qualification | Sobresaliente Cum Laude |
CFD simulation of fishing nets with simplified knots
1st Spanish Fluid Mechanics Conference (SFMC22)
National
| Authors | Sergio Roget, M. Lema, Anne Gosset |
| Place | Cádiz (España) |
SIMPLIFIED KNOT GEOMETRY STRATEGY FOR CFD SIMULATION OF FISHING NETS
4th Iberian Meeting of OpenFoam Users (Foam@Iberia 2022)
International
| Authors | Sergio Roget, M. Lema, Anne Gosset |
| Place | Santander (España) |
High fidelity simulations of the wiping of low viscosity liquid films
14th European Fluid Mechanics Conference (EFMC14)
International
| Authors | D. Barreiro-Villaverde, Anne Gosset, M. A. Mendez, M. Lema |
| Place | Atenas (Grecia) |
Multiscale analysis of 3D VOF LES simulations of the jet wiping process
4th Iberian Meeting of OpenFoam Users (Foam@Iberia 2022)
International
| Authors | D. Barreiro-Villaverde, Anne Gosset, M. A. Mendez, M. Lema |
| Place | Santander (España) |
On the wiping of high kapitza liquid films
17th OpenFOAM Workshop
International
| Authors | D. Barreiro-Villaverde, Anne Gosset, M. A. Mendez, M. Lema |
| Place | Cambridge (Reino Unido) |
Implementation of a solver to simulate industrial galvanization
V XoveTIC Conference 2022
Autonomous
| Authors | D. Barreiro-Villaverde, Anne Gosset, M. A. Mendez, M. Lema |
| Organization | Centro de Investigación en Tecnoloxías da Información e as Comunicacións (CITIC) |
| Place | Coruña, A (España) |
High and low fidelity to investigate the instabilities in jet wiping
1st Spanish Fluid Mechanics Conference (SFMC22)
National
| Authors | D. Barreiro-Villaverde, Anne Gosset, M. A. Mendez, M. Lema |
| Place | Cádiz (España) |
On the jet wiping of high Kapitza liquid films
17th OpenFoam Workshop (OFW17)
International
| Authors | D. Barreiro-Villaverde, Anne Gosset, M. A. Mendez, M. Lema |
| Place | Cambridge (Reino Unido) |
High and low fidelity models to investigate the instabilities in jet wiping
1st Spanish Fluid Mechanics Conference (SFMC22)
National
| Authors | D. Barreiro-Villaverde, Anne Gosset, M. A. Mendez, M. Lema |
| Place | Cádiz (España) |
A porous medium approach to assess the aerodynamics of a drying kiln with CFD
1st Spanish Fluid Mechanics Conference (SFMC22)
National
| Authors | Anne Gosset, D. Barreiro-Villaverde, S. Roget, M. Lema |
| Place | Cádiz (España) |
Extrusion and deposition of a molten polymer in fused deposition modeling
14th European Coating Symposium (ECS21)
International
| Authors | Anne Gosset, D. Barreiro-Villaverde, Juan Carlos Becerra Permuy, M. Lema, Ana Ares-Pernas, María J. Abad López |
| Place | Bruselas (Bélgica) |
Simulation of the fluid-structure interaction in fishing nets
IV Congreso XoveTIC 2021
International
| Authors | Sergio Roget, M. Lema, A. Gosset |
| Organization | Centro de Investigación en Tecnoloxías da Información e as Comunicacións (CITIC) |
| Place | Coruña, A (España) |
| DOI | https://doi.org/10.3390/engproc2021007031 |
Numerical simulations and modal analysis to investigate the defects in a coating process
IV Congreso XoveTIC 2021
International
| Authors | D. Barreiro-Villaverde, M. Lema, Anne Gosset |
| Organization | Centro de Investigación en Tecnoloxías da Información e as Comunicacións (CITIC) |
| Place | Coruña, A (España) |
Simulation of a stirred-tank reactor flow and effect of free surface modelling
12th OpenFoam Workshop (OFW12)
International
| Authors | David Rodríguez Calvete, D. Barreiro-Villaverde, Lorena Fernández, Anne Gosset, M. Lema |
| Place | Exeter (Reino Unido) |
Cavitating flow in a globe valve: Calibration of mass transfer models and simulations with OpenFoam
1st Workshop on Safety and Control Valves
International
| Authors | Anne Gosset, Isabel Lamas Galdo, M. Lema |
| Organization | INSTITUT VON KARMAN DE DYNAMIQUE DES FLUIDES (IVKDF) |
| Place | Bruselas (Bélgica) |
Periodic Phenomena on a Partially Cavitating Hydrofoil
8th International Symposium on Cavitation (CAV 2012)
International
| Authors | A. Gosset, M. Lema, Fernando López Peña |
| Place | Singapur (Singapur) |
| DOI | https://doi.org/10.3850/978-981-07-2826-7_277 |
Comparison of Different Passive Control Solutions for Reducing SRM Pressure Oscillations Using Cold Flow Experiments
44th AIAA ASME SAE ASEE Joint Propulsion Conference and Exhibit
International
| Authors | M. Lema |
| Place | Hartford, CT (Estados Unidos) |
Academic or management positions held by teacher.