| Department | Mathematics |
| Knowledgment area | Applied Mathematics |
| Research | Research group Propiedades térmicas y reológicas de materiales |
| Research lines | polímeros, tecnología de materiales, modelos matemáticos |
| Contacto | UDC directory |
| Orcid id0000-0002-6830-5498 ResearcherIDACA-6895-2022 Scopus57191283646 | |
This section shows the teaching given in degrees, masters and other officers studies in last 6 years.
| Subject and involved studies | Type | Distance hours | Total hours |
|---|---|---|---|
|
Final Year Dissertation
Degree in Mechanical Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
|
Compulsory | 0 | 0.5 |
| Subject and involved studies | Type | Distance hours | Total hours |
|---|---|---|---|
| Differential Equations | Core | 0 | 90 |
| Final Year Dissertation | Compulsory | 0 | 12.5 |
| Final Year Dissertation | Compulsory | 0 | 5 |
| Linear Algebra | Core | 0 | 108 |
|
Master's Dissertation
Master's in Complex Materials: Thermal Analysis and Rheology
|
Compulsory | 0 | 2 |
| Mathematics I | Core | 0 | 30 |
|
Thermo-Mechanical Properties of Materials. Fundamental Methods
Master's in Complex Materials: Thermal Analysis and Rheology
|
Compulsory | 0 | 7 |
| Work Placement | Optional | 0 | 3 |
| Work Placement | Optional | 0 | 2 |
| Work Placement | Compulsory | 0 | 0.75 |
| Work Placement | Optional | 0 | 0.75 |
| Subject and involved studies | Type | Distance hours | Total hours |
|---|---|---|---|
|
Differential Equations
Degree in Naval Architecture and Ocean Engineering
|
Core | 0 | 90 |
|
Final Year Dissertation
Degree in Industrial Technology Engineering
|
Compulsory | 0 | 4 |
|
Final Year Dissertation
Degree in Podiatry
|
Compulsory | 0 | 2 |
|
Master's Dissertation
Master's in Complex Materials: Thermal Analysis and Rheology
|
Compulsory | 0 | 8.5 |
|
Mathematics I
Engineering Degree in Industrial Design and Product Development
|
Core | 0 | 60 |
|
Thermo-Mechanical Fatigue
Master's in Complex Materials: Thermal Analysis and Rheology
|
Optional | 0 | 7 |
|
Work Placement
Master in Naval Architecture and Ocean Engineering
|
Compulsory | 0 | 2.5 |
|
Work Placement
Master in Naval Architecture and Ocean Engineering
|
Optional | 0 | 5 |
| Subject and involved studies | Type | Distance hours | Total hours |
|---|---|---|---|
|
Differential Equations
Degree in Naval Architecture and Ocean Engineering
|
Core | 0 | 90 |
|
Linear Algebra
Degree in Industrial Technology Engineering
Degree in Mechanical Engineering
Industrial Engineering
|
Core | 0 | 30 |
|
Mathematics I
Engineering Degree in Industrial Design and Product Development
|
Core | 0 | 30 |
|
Thermo-Mechanical Fatigue
Master's in Complex Materials: Thermal Analysis and Rheology
|
Optional | 0 | 7 |
| Subject and involved studies | Type | Distance hours | Total hours |
|---|---|---|---|
|
Differential Equations
Degree in Naval Architecture and Ocean Engineering
|
Core | 0 | 60 |
|
Final Year Dissertation
Degree in Podiatry
|
Compulsory | 0 | 2 |
|
Final Year Dissertation
Degree in Mechanical Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
|
Compulsory | 0 | 8 |
|
Final Year Dissertation
Degree in Industrial Technology Engineering
|
Compulsory | 0 | 4 |
|
Linear Algebra
Degree in Industrial Technology Engineering
Degree in Mechanical Engineering
Industrial Engineering
|
Core | 0 | 38 |
|
Master's Dissertation
Master´s Degree in Occupational Risk Prevention and Common Risks
|
Compulsory | 0 | 6 |
|
Master's Dissertation
Master's in Complex Materials: Thermal Analysis and Rheology
|
Compulsory | 0 | 5 |
|
Mathematics I
Engineering Degree in Industrial Design and Product Development
|
Core | 0 | 32 |
|
Thermo-Mechanical Fatigue
Master's in Complex Materials: Thermal Analysis and Rheology
|
Optional | 0 | 7 |
|
Work Placement
Degree in Naval Architecture and Ocean Engineering
|
Optional | 0 | 0 |
|
Work Placement
Degree in Mechanical Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
|
Optional | 0 | 0 |
|
Work Placement
Degree in Industrial Technology Engineering
|
Optional | 0 | 0 |
|
Work Placement
Master´s Degree in Occupational Risk Prevention and Common Risks
|
Compulsory | 0 | 2 |
|
Work Placement
Master´s Degree in Designs, Development and Marketing of Videogames
|
Compulsory | 0 | 0 |
|
Work Placement
Master in Industrial Engineering
|
Compulsory | 0 | 0 |
|
Work Placement
Master in Industrial Engineering
|
Optional | 0 | 0 |
|
Work Placement
Master in Naval Architecture and Ocean Engineering
|
Compulsory | 0 | 0 |
|
Work Placement
Master in Naval Architecture and Ocean Engineering
|
Optional | 0 | 0 |
| Subject and involved studies | Type | Distance hours | Total hours |
|---|---|---|---|
|
Differential Equations
Degree in Naval Architecture and Ocean Engineering
|
Core | 0 | 60 |
|
Final Year Dissertation
Degree in Mechanical Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
|
Compulsory | 0 | 8 |
|
Final Year Dissertation
Degree in Industrial Technology Engineering
|
Compulsory | 0 | 8 |
|
Final Year Dissertation
Degree in Podiatry
|
Compulsory | 0 | 2 |
|
Linear Algebra
Degree in Industrial Technology Engineering
Degree in Mechanical Engineering
Industrial Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
|
Core | 0 | 33 |
|
Master's Dissertation
Master's in Complex Materials: Thermal Analysis and Rheology
|
Compulsory | 0 | 10 |
|
Mathematics I
Engineering Degree in Industrial Design and Product Development
|
Core | 0 | 50 |
|
Work Placement
Degree in Mechanical Engineering
Simultaneous Program of the Degree in Mechanical Ingineering and the Degree in Naval and Ocean Engineering
|
Optional | 0 | 0 |
|
Work Placement
Degree in Industrial Technology Engineering
|
Optional | 0 | 0 |
|
Work Placement
Degree in Naval Architecture and Ocean Engineering
|
Optional | 0 | 0 |
|
Work Placement
Master in Naval Architecture and Ocean Engineering
|
Compulsory | 0 | 0 |
|
Work Placement
Master in Industrial Engineering
|
Compulsory | 0 | 0 |
|
Work Placement
Master in Industrial Engineering
|
Optional | 0 | 0 |
|
Work Placement
Master´s Degree in Designs, Development and Marketing of Videogames
|
Compulsory | 0 | 0 |
|
Workplace Safety in Strategic Economic Sectors
Master´s Degree in Occupational Risk Prevention and Common Risks
|
Optional | 0 | 6 |
Defined tutoring by teacher for 2024/2025 academic course.
| Quarter | Day | Site |
|---|---|---|
| 1st quarter |
Tuesday
16:00 a 18:00 |
Edificio de Batallones (previa reserva por correo electrónico) |
| 1st quarter |
Thursday
11:00 a 14:00 |
Edificio de Batallones (previa reserva por correo electrónico) |
| 2nd quarter |
Tuesday
12:30 a 14:30 |
Edificio de Batallones (previa reserva por correo electrónico) |
| 2nd quarter |
Thursday
11:00 a 14:00 |
Edificio de Batallones (previa reserva por correo electrónico) |
| 2nd chance |
Tuesday
10:00 a 12:00 |
Edificio de Batallones (previa reserva por correo electrónico) |
Directed or codirected by current teacher since 2013 year.
| Design of the activity of a light boilermaking factory in an industrial site. |
| Environmental impact of material used in footwear: Narrative Review |
| Study and dynamic mechanical analysis of a structural adhesive for shipbuilding |
| Study and dynamic mechanical analysis of a structural adhesive for shipbuilding |
| Desing of a bank office in the P.B. of a hossing bulding (electrical and fire installation) |
| Rheology of high performance polymer polyetylene and polypropylene nanocomposites |
| Development, structural and mechanical investigation of composite (mono) multilayered films |
| Firefighting and air cheaning installation project at industrial building for beverage storage and distribution |
| Installations in a building and building in avda. astano in the polygon of vilar do colo |
| Metal structure calculation, cover and exterior enclosure for a center dedicated to end-of-life vehicle treatment |
| Analysis of risks in the construction of a supermarket |
| Facilities for podiatry and phisiotherapy clinic |
| Supply unity of fuel at low price in an industrial polygon |
Select merit type and year to query research merits.
Smart composite materials for selective adsorption/water purification
| Funding entity | CENTRE NATIONAL DE LA RECHERCHE SCIENTIFIQUE CNRS (CNRS) |
| Main researches | Alain Ponton, Jorge J. López Beceiro |
| Type | Proyecto Internacional |
| Dates | From 01/01/2023 to 31/12/2027 |
Asesoramiento en el estudio de la susceptibilidad de estructuras textiles a la liberación de microfibras
| Funding entity | INDITEX, S.A. |
| Main researches | Jorge J. López Beceiro |
| Type | Contrato |
| Dates | From 12/01/2022 to 12/01/2024 |
Estudio de adhesivo para la validación e implementación de su uso en el astillero
| Funding entity | NAVANTIA |
| Main researches | Jorge J. López Beceiro |
| Type | Contrato |
| Dates | From 01/01/2022 to 31/05/2022 |
ASESORAMIENTO Y REALIZACIÓN DE ENSAYOS PARA LA EVALUACIÓN DEL TIEMPO DE INDUCCIÓN OXIDATIVA DE GEOSINTÉTICOS DE POLIETILENO DE ALTA DENSIDAD DE ACUERDO A LAS NORMAS ASTM D5885 Y UNE EN ISO 11357-6
| Funding entity | GSR TECH CONTROL, S.L. |
| Main researches | Jorge J. López Beceiro |
| Type | Contrato |
| Dates | From 16/06/2022 to 30/09/2022 |
ARRECIFE ARTIFICIAL - PROARR
| Funding entity | Xunta de Galicia. Delegación Coruña |
| Type | Contrato |
| Dates | From 01/07/2020 to 31/12/2020 |
CONTRATO DE COLABORACIÓN PARA EL DESARROLLO DEL PROYECTO "PANELES SÁNDWICH LIGEROS RESISTENTES AL FUEGO PARA LA CONSTRUCCIÓN NAVAL CON UN MEJOR EQUILIBRIO ENTRE AISLAMIENTO ACÚSTICO Y PROPIEDADES MECÁNICAS Y ECOLÓGICAS" EN EL MARCO DEL PROGRAMA SP
| Funding entity | GABADI, S.L. |
| Main researches | Ramón Artiaga |
| Type | Contrato |
| Dates | From 12/02/2020 to 12/09/2023 |
UMI UDC-NAVANTIA O estaleiro do futuro 4.0 (Consolidación)
| Funding entity | Axencia Galega de Innovación |
| Main researches | Salvador Naya |
| Type | Proyecto Programas Autonomicos |
| Dates | From 13/11/2018 to 31/10/2021 |
Ensayos sobre panel composite, TGA, difracción RX, fluorescencia RX, nº de pedido
| Funding entity | Sistemas Técnicos del Accesorio y Comp. S. L. |
| Main researches | Ramón P. Artiaga 33854009X |
| Type | Contrato |
| Dates | From 17/03/2017 to 06/04/2017 |
Asistencia científico técnica. Problemática del autopegado de papel impregnado EPS. Pedido 7000689554
| Funding entity | Financiera Maderera, SA |
| Main researches | Ramón Artiaga |
| Type | Contrato |
| Dates | From 21/06/2016 to 20/10/2017 |
Estudio del curado de tableros. Pedido 700925314
| Funding entity | Financiera Maderera, SA |
| Main researches | Ramón Artiaga |
| Type | Contrato |
| Dates | From 15/11/2016 to 14/11/2017 |
Estudio sobre "Optimización de formulación y proceso para obtener espumas florales"
| Funding entity | Tecnológica de espumas Galicia, S.L. |
| Main researches | Ramón P. Artiaga Díaz |
| Type | Contrato |
| Dates | From 19/09/2016 to 18/11/2017 |
Ensayo DSC/TGAPE+ carga (pedido 644/0000654),Ensayo DSC/TGAPE+ carga y PE sin carga (pedido 644/0000680)
| Funding entity | SISTEMAS TÉCNICOS DEL ACCESORIO Y COMP., S.L. |
| Main researches | Ramón Artiaga |
| Type | Contrato |
| Dates | From 06/10/2016 to 31/10/2016 |
UMI UDC NAVANTIA O estaleiro do futuro
| Funding entity | Axencia Galega de Innovación |
| Main researches | Daniel Pena |
| Type | Proyecto Programas Autonomicos |
| Dates | From 01/09/2015 to 31/12/2018 |
Análisis termogravimétrico pedido nº 465017152
| Funding entity | BORGWAGNER EMISSION SYSTEMS SPAIN, S.L. |
| Main researches | Ramón Artiaga-33854009X |
| Type | Contrato |
| Dates | From 24/03/2014 to 08/05/2014 |
CONTRATO DE COLABORACIÓN ENTRE A FUAC, NAVANTIA S.A. E D. JESÚS CARDENAL CARRO
| Funding entity | NAVANTIA |
| Type | Contrato |
| Dates | From 14/12/2005 to 01/01/2006 |
Validación de la simulación numérica de la dinámica de vehículos
| Funding entity | Secretaria Xeral de Investigación e Desenvolvemento Tecnolóxico |
| Type | Proyecto Otros Programas |
| Dates | From 15/07/2003 to 14/07/2005 |
Desarrollo de estrategias de Control para Resolver Situaciones de Emergencia en Vehículos Automóviles
| Funding entity | Fundación Instituto Tecnológico para la Seguridad del Automóvil (FITSA) |
| Main researches | Cardenal Carro |
| Type | Contrato |
| Dates | From 01/01/2001 to 31/12/2001 |
Tiempo real en la simulación de la dinámica de Vehículos Automóviles. Aplicación al control en maniobras de emergencia
| Funding entity | Secretaria Xeral de Investigación e Desenvolvemento Tecnolóxico |
| Type | Proyecto Otros Programas |
| Dates | From 26/08/2000 to 26/08/2002 |
Application of the Time-Temperature Superposition Principle to Predict Long-Term Behaviour of an Adhesive for Use in Shipbuilding
| Authors | Souto-Silvar, Daniel A., Álvarez-García, A., Díaz-Díaz, A., J. Rodríguez-Dopico, Francisco, López-Beceiro, Jorge |
| Journal | Arabian Journal for Science and Engineering Vol. 49 Num. 2 (pages 2345 to 2355) |
| DOI | https://doi.org/10.1007/s13369-023-08219-4 |
Isothermal crystallization kinetics of commercial PA66 and PA11
| Authors | Laura S. Vázquez, Mercedes Pereira, Díaz-Díaz, Ana-María, López-Beceiro, Jorge, Ramon Artiaga |
| Journal | JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY Vol. 149 Num. 19 (pages 11013 to 11023) |
| DOI | https://doi.org/10.1007/s10973-024-13522-9 |
Thermogravimetry as a tool to evaluate the contribution of different fabric constituents to fibre release
| Authors | Mercedes Pereira, J. López-Beceiro, Díaz-Díaz, Ana-María, A. Álvarez García, Laura S. Vázquez, Ramón Artiaga |
| Journal | JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY Vol. 149 (pages 10497 to 1010509497) |
| DOI | https://doi.org/10.1007/s10973-024-13287-1 |
A Relatively Simple Look at the Rather Complex Crystallization Kinetics of PLLA
| Authors | Lopez-Beceiro, Jorge, Diaz-Diaz, Ana-Maria, Fernandez-Perez, Enrique, Ferreira, Ignatius, Focke, Walter W., Artiaga Díaz R.P. |
| Journal | POLYMERS Vol. 15 Num. 8 |
| DOI | https://doi.org/10.3390/polym15081880 |
Thermal and Rheological Properties of Fischer-Tropsch Wax/High-Flow LLDPE Blends
| Authors | Mhlabeni, Thobile, Ramjee, Shatish, Jorge López-Beceiro, Díaz-Díaz, Ana-María, Artiaga, Ramón, Focke, Walter |
| Journal | Macromolecular Materials and Engineering Vol. n/a Num. n/a (pages 2300125 to 2300125) |
| DOI | https://doi.org/10.1002/mame.202300125 |
The effect of marine ageing on the mechanical properties of a structural adhesive
| Authors | Souto-Silvar, Daniel A., Álvarez-García, A., Diaz-Diaz, Ana-Maria, F.J. Rodríguez-Dopico, López-Beceiro, Jorge |
| Journal | Mechanics of Time-Dependent Materials |
| DOI | https://doi.org/10.1007/s11043-023-09653-5 |
Crystallization kinetics of a commercial poly (lactic acid) based on characteristic crystallization time and optimal crystallization temperature
| Authors | A. Diaz-Díaz, J. Lopez-Beceiro, Li Yanchun, Cheng Yi, R. Artiaga |
| Journal | JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY Vol. 145 (pages 3125 to 3132) |
| DOI | https://doi.org/10.1007/s10973-020-10081-7 |
A Logistic Approach for Kinetics of Isothermal Pyrolysis of Cellulose
| Authors | J. López-Beceiro, A. Díaz-Díaz, A. Álvarez García, J. Tarrío-Saavedra, S. Naya, R. Artiaga |
| Journal | Processes Vol. 9 Num. 3 (pages 551 to 551) |
The Complexity of Lignin Thermal Degradation in the Isothermal Context
| Authors | J. López-Beceiro, A. Díaz-Díaz, A. Álvarez García, J. Tarrío Saavedra, S. Naya Fernández, R. Artiaga |
| Journal | Processes Vol. 9 Num. 7 (pages 1154 to 1154) |
Erosive Degradation Study of Concrete Augmented by Mussel Shells for Marine Construction
| Authors | C. Camba, Mier J.L., Carral Couce L.M., M. I. Lamas, Carlos Álvarez-Feal, A. Díaz-Díaz, J. Tarrío Saavedra |
| Journal | Journal of Marine Science and Engineering Vol. 9 Num. 1087 (pages 1 to 21) |
Properties of Mosquito Repellent-Plasticized Poly (lactic acid) Strands
| Authors | António B. Mapossa, J. López-Beceiro, A. Díaz-Díaz, Ramón Artiaga, Dennis S. Moyo, Thabang N. Mphateng, Walter W. Focke |
| Journal | Molecules Vol. 26 Num. 19 |
| DOI | https://doi.org/10.3390/molecules26195890 |
Evaluation of the Curing of Adhesive Systems by Rheological and Thermal Testing
| Authors | A. Díaz-Díaz, Sánchez-Silva B., J. Tarrío-Saavedra, J. López-Beceiro, Silvia Gómez Barreiro, R. Artiaga |
| Journal | Jove-Journal of Visualized Experiments Vol. 161 |
Measurement of single three-dimensional moduli to evaluate the effect of a uniform magnetic field on magnetorheological fluids
| Authors | Carlos Gracia-Fernández, Silvia Gómez-Barreiro, Ana Álvarez García, A. Díaz-Díaz, Jorge López-Beceiro, Ramón Artiaga |
| Journal | RHEOLOGICA ACTA |
| DOI | https://doi.org/10.1007/s00397-020-01196-7 |
Thermal and rheological comparison of adhesives
| Authors | B. Sánchez-Silva, A. Díaz-Díaz, J. Tarrío Saavedra, J. López-Beceiro, C. Gracia Fernández, R. Artiaga |
| Journal | JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY Vol. 138 (pages 3357 to 3366) |
| DOI | https://doi.org/10.1007/s10973-019-08882-6 |
Dynamic rheological comparison of silicones for podiatry applications
| Authors | A. Díaz-Díaz, Sánchez-Silva B., J. Tarrío-Saavedra, J. López-Beceiro, Janeiro-Arocas, C. Gracia Fernandez, R. Artiaga |
| Journal | Journal of the Mechanical Behavior of Biomedical Materials Vol. 85 (pages 66 to 71) |
Kinetics of thermal degradation of cellulose: Analysis based on isothermal and linear heating data
| Authors | J. López-Beceiro, A. Álvarez García, Teresa Sebio-Puñal, Sonia Zaragoza Fernández, Begoña Álvarez García, A. Díaz-Díaz, Julia Maria Janeiro Arocas, Ramón Artiaga Díaz |
| Journal | BIORESOURCES Vol. 11 Num. 3 (pages 5870 to 5888) |
| DOI | https://doi.org/10.15376/biores.11.3.5870-5888 |
Un Filtro de Kalman Lineal Variable Basado en Cuaternas para Unidad de Medida Inercial
| Authors | A. Díaz-Díaz |
| Publishing | D.V. Chavín, Servicios Gráficos y Editoriales S. L. , Madrid (España) |
| ISBN | 978-84-695-7639-7 |
Análise Multivariante Aplicada á Liberación de Fibras Téxtiles
XVI Congreso Galego de Estatística e Investigación de Operacións (SGAPEIO)
International
| Authors | Mercedes Pereira, Laura S. Vázquez, Díaz-Díaz, Ana-María, Salvador Naya, Jorge José López Beceiro |
| Place | Coruña, A (España) |
Assesment of Fibre Release Susceptibility by Pilling Exxperiments and Thermal Analysis Techniques
3rd Journal of Thermal Analysis and Calorimetry Conference and
9th V4 (Joint Czech-Hungarian-Polish-Slovakian) Thermoanalytical Conference
International
| Authors | Mercedes Pereira, Lopez-Beceiro, Jorge, Diaz-Diaz, Ana-Maria, Laura S. Vázquez, Ramón Artiaga |
| Organization | Akadémiai Kiadó |
| Place | Balatonfüred (Hungría) |
Thermogravimetry as a Tool to Discriminate the Susceptibility of Different Components to Fibre Release from the Same Fabric
3rd Journal of Thermal Analysis and Calorimetry Conference and
9th V4 (Joint Czech-Hungarian-Polish-Slovakian) Thermoanalytical Conference
International
| Authors | Mercedes Pereira, López-Beceiro, Jorge, Díaz-Díaz, Ana-María, Álvarez-García, A., Laura S. Vázquez, Ramón Artiaga |
| Organization | Akadémiai Kiadó |
| Place | Balatonfüred (Hungría) |
Diseño, fabricación, transporte e instalación de «arrecifes artificiales verdes» en las rías gallegas: una oportunidad de economía circular y desarrollo sostenible
Congreso Panamericano del INSTITUTO PANAMERICANO DE INGENIERÍA NAVAL (IPIN) XXVII COPINAVAL
International
| Authors | Luis Carral Couce, Maria Jesus Rodríguez-Guerreiro, Isabel Lamas Galdo, Lucía Santiago Caamaño, Carolina Camba Fabal, Javier Tarrío, A. Díaz-Díaz, Laura Castro-Santos, Carlos Álvarez-Feal, Alicia Munín Doce, Juan J. Cartelle Barros, Rodrigo Carballo |
| Organization | Instituto Panamericano de Ingeniería Naval, Transporte marítimo e Ingeniería portuaria |
| Place | La Habana (Cuba) |
Diseño, fabricación, transporte e instalación de «arrecifes artificiales verdes» en las rías gallegas: una oportunidad de economía circular y desarrollo sostenible
Congreso Panamericano del INSTITUTO PANAMERICANO DE INGENIERÍA NAVAL (IPIN) XXVII COPINAVAL
International
| Authors | Luis Carral Couce, Maria Jesus Rodríguez-Guerreiro, Isabel Lamas Galdo, Lucía Santiago Caamaño, Carolina Camba Fabal, Javier Tarrío, A. Díaz-Díaz, Laura Castro-Santos, Carlos Álvarez-Feal, Alicia Munín Doce, Juan J. Cartelle Barros, Rodrigo Carballo |
| Organization | Instituto Panamericano de Ingeniería Naval, Transporte marítimo e Ingeniería portuaria |
| Place | La Habana (Cuba) |
The curing process of a fast-curing adhesive observed by rheology
IBERIAN MEETING ON RHEOLOGY- IBEREO 2019
International
| Authors | A. Díaz-Díaz, Sánchez-Silva B., J. Tarrío Saavedra, Jorge José López Beceiro, Carlos Gracia-Fernández, Ramón Artiaga |
| Place | Porto (Portugal) |
Isothermal Crystallization Kinetics from Multiple DSC Curve Fitting
The Twenty-Seventh Annual International Conference on COMPOSITES NANO/ENGINEERING (ICCE-27)
International
| Authors | A. Díaz-Díaz, Jorge López, J. Tarrío Saavedra, C. Gracia Fernández, Ramón Artiaga |
| Place | Granada (España) |
A new Approach for Temperature Dependence Of Curing Reactions
The Twenty-Seventh Annual International Conference on COMPOSITES NANO/ENGINEERING (ICCE-27)
International
| Authors | A. Díaz-Díaz, J. López-Beceiro, C. Gracia Fernández, Ramón Artiaga |
| Place | Granada (España) |
Dynamic rheological comparison of silicones for podiatry applications
IBERIAN MEETING ON RHEOLOGY- IBEREO 2019
International
| Authors | C. Gracia Fernández, A. Díaz-Díaz, Sánchez-Silva B., J. Tarrío Saavedra, Julia Maria Janeiro Arocas, J. López-Beceiro, R. Artiaga |
| Place | Porto (Portugal) |
Effect of crosslinking density of silicones on rheological properties
IBERIAN MEETING ON RHEOLOGY- IBEREO 2019
International
| Authors | J. López-Beceiro, A. Díaz-Díaz, J. Tarrío Saavedra, C. Gracia Fernández, A. Álvarez García, R. Artiaga |
| Place | Porto (Portugal) |
Melting and crystallization rates of three common feed polymers for fused deposition modelling
2nd Journal of Thermal Analysis and Calorimetry Conference
International
| Authors | J. López-Beceiro, J. Tarrío Saavedra, A. Díaz-Díaz, A. Álvarez García, R. Artiaga |
| Place | Budapest (Hungría) |
Viscoelastic behavior of silicones with different crosslinking density
2nd Journal of Thermal Analysis and Calorimetry Conference
International
| Authors | J. López-Beceiro, A. Díaz-Díaz, J. Tarrío-Saavedra, C. Gracia Fernández, B. Gómez Barrera, R. Artiaga |
| Place | Budapest (Hungría) |
Thermal degradation of common feed thermoplastics for fused deposition modelling
2nd Journal of Thermal Analysis and Calorimetry Conference
International
| Authors | A. Díaz-Díaz, J. López-Beceiro, J. Tarrío Saavedra, R. Artiaga |
| Place | Budapest (Hungría) |
Rheological study of silicone
International Symposium on Elaboration and Charazterization of Multistructured Materials ECMM2018
International
| Authors | A. Díaz-Díaz |
| Organization | Université Paris Diderot-Paris 7 |
| Place | Paris (Francia) |
Optimización de la Composición Química de Espumas Florales Fenólicas
XXIII ENCONTRO GALEGO-PORTUGUÉS DE QUÍMICA
International
| Authors | A. Díaz-Díaz, Sánchez-Silva B., Jorge José López Beceiro, A. Álvarez García, Ramón Artiaga |
| Place | Ferrol (España) |
MODELO CINÉTICO BASADO EN LA FUNCIÓN LOGÍSTICA GENERALIZADA APLICADO AL CURADO DE UN TERMOESTABLE
Congreso Internacional de Tratamientos Térmicos y de Superficie TRATERMAT 2017
International
| Authors | Sánchez-Silva B., A. Díaz-Díaz, D. IGLESIAS-GIAO, Jorge José López Beceiro, C. Gracia Fernández, Ramón Artiaga |
| Organization | UNIVERSIDAD DE JAEN |
| Place | Linares (España) |
Rheological testing of UV cure using two different sources of light
MARITIME TRANSPORTATION AND HARVESTING OF SEA RESOURCES- IMAM 2017
International
| Authors | C. Gracia Fernández, Silvia Gómez Barreiro, A. Díaz-Díaz, A. Álvarez García, Javier Tarrío, Jorge José López Beceiro, Ramón Artiaga |
| Organization | Instituto Superior Técnico |
| Place | Lisboa (Portugal) |
A Simple Rheological Method for Comparing Hot Melt Adhesives
MARITIME TRANSPORTATION AND HARVESTING OF SEA RESOURCES- IMAM 2017
International
| Authors | Silvia Gómez Barreiro, C. Gracia Fernández, A. Díaz-Díaz, A. Álvarez García, Sánchez-Silva B. |
| Organization | Instituto Superior Técnico |
| Place | Lisboa (Portugal) |
Cristalización de polímeros desde el fundido
Congreso Internacional de Tratamientos Térmicos y de Superficie TRATERMAT 2017
International
| Authors | A. Díaz-Díaz, Sánchez-Silva B., J. López-Beceiro, C. Gracia Fernández, R. Artiaga |
| Organization | UNIVERSIDAD DE JAEN |
| Place | Linares (España) |
Clasificación de aceites comestibles según su composición y estabilidad a la oxidación
XIII Congreso Galego de Estatística e Investigación de Operacións (XIII SGAPEIO)
National
| Authors | A. Díaz-Díaz, Jorge José López Beceiro, Ramón Artiaga, J. Tarrío Saavedra |
| Place | Ferrol (España) |
Generalized logistic function applied for kinetic analysis through thermal data
ECMM Summer School (Elaboration and Characterization of Multistructured Materials) 2017
International
| Authors | A. Díaz-Díaz, Jorge José López Beceiro, Silvia Gómez Barreiro, C. Gracia Fernández, J. Tarrío Saavedra, Ramón Artiaga |
| Organization | Université Paris Diderot |
| Place | París (Francia) |
Evaluation of Edible Oils by PDSC (Pressure Differential Scanning Calorimetry)
3rd Workshop in Complex Materials
International
| Authors | A. Díaz-Díaz |
| Organization | Universidad París Diderot (París VII) |
| Place | París (Francia) |
Estimation of the position and trajectory of a vehicle on the0Abasis of on board data acquisition.
Eccomas Thematic Conference on Advances in 0AComputational Multibody Dynamics 2003
International
| Authors | Álvaro Deibe Díaz, Jose Augusto Anton Nacimiento, A. Díaz-Díaz, Jesús Cardenal Carro |
| Place | Lisboa (Portugal) |
Estimación de la posición y la trayectoria de un vehículo automóvil mediante el uso de sensores MEMS inerciales y magnéticos
XV Congreso Nacional de Ingeniería Mecánica
National
| Authors | Álvaro Deibe Díaz, Jose Augusto Anton Nacimiento, A. Díaz-Díaz, Fernando Cobeño Arlegui, Jesús Cardenal Carro |
| Place | Cádiz (España) |
Validación experimental de la simulación de la dinámica de un vehículo automóvil
XV Congreso Nacional de Ingeniería Mecánica
National
| Authors | Álvaro Deibe Díaz, Jose Augusto Anton Nacimiento, A. Díaz-Díaz, Fernando Cobeño Arlegui, Jesús Cardenal Carro |
| Place | Cádiz (España) |
Estrategias de reordenamiento de matrices huecas para el tratamiento óptimo de las ecuaciones de la dinámica de mecanismos
XV Congreso Nacional de Ingeniería Mecánica
National
| Authors | Jose Augusto Anton Nacimiento, Fernando Cobeño Arlegui, Álvaro Deibe Díaz, A. Díaz-Díaz, Jesús Cardenal Carro |
| Place | Cádiz (España) |
Aceleración del proceso de integración de las ecuaciones de la dinámica mediante el empleo de técnicas para matrices dispersas y paralelización de tareas.
XIV Congreso Nacional de Ingeniería Mecánica
National
| Authors | Jesús Cardenal Carro, Álvaro Deibe Díaz, Jose Augusto Anton Nacimiento, A. Díaz-Díaz |
| Place | Madrid (España) |
Instrumentación y toma de medidas en un modelo de vehículo automóvil para el control de trayectoria
XIV Congreso Nacional de Ingeniería Mecánica
National
| Authors | Álvaro Deibe Díaz, Jose Augusto Anton Nacimiento, A. Díaz-Díaz, Jesús Cardenal Carro |
| Place | Madrid (España) |
Academic or management positions held by teacher.