| Department | Naval and Industrial Engineering |
| Knowledgment area | Mechanical Engineering |
| Research | Research group Laboratorio de Ingeniería Mecánica |
| Research lines | Modelado, Supervisión y Control de Procesos no Lineales, Aplicaciones Industriales del Láser, Análisis de Máquinas y Mecanismos. |
| Contacto | UDC directory |
| Orcid id0000-0002-7228-1687 ResearcherIDAAI-3881-2020 Scopus35262542700 | |
This section shows the teaching given in degrees, masters and other officers studies in last 6 years.
| Subject and involved studies | Type | Distance hours | Total hours |
|---|---|---|---|
| Design Management | Compulsory | 0 | 26 |
| Final Year Dissertation | Compulsory | 0 | 36.5 |
|
Master's dissertation
University Master´s Degree in Compulsory Secondary Teachers, Upper Secondary Education, Professional Training and Language Teaching
|
Compulsory | 0 | 2.5 |
| Masters Thesis | Compulsory | 0 | 1 |
| Mechanical Systems | Compulsory | 0 | 40 |
|
Techniques and Methods
Master's Degree in Industrial Design Engineering
|
Compulsory | 0 | 36 |
|
Technology for professorship of bachelor
University Master´s Degree in Compulsory Secondary Teachers, Upper Secondary Education, Professional Training and Language Teaching
|
Compulsory | 0 | 11 |
| Theory of Machines | Compulsory | 0 | 97.5 |
| Subject and involved studies | Type | Distance hours | Total hours |
|---|---|---|---|
|
Design Management
Master's Degree in Industrial Design Engineering
|
Compulsory | 0 | 18 |
|
Final Year Dissertation
Engineering Degree in Industrial Design and Product Development
|
Compulsory | 0 | 25.5 |
|
Master's dissertation
University Master´s Degree in Compulsory Secondary Teachers, Upper Secondary Education, Professional Training and Language Teaching
University Master´s Degree in Compulsory Secondary Teachers, Upper Secondary Education, Professional Training and Language Teaching. Specialization in Experimental Sciences, Mathematics, Technology and Physical Education (Technology)
|
Compulsory | 0 | 3 |
|
Master's Dissertation
Master's Degree in Industrial Design Engineering
|
Compulsory | 0 | 1 |
|
Mechanical Systems
Engineering Degree in Industrial Design and Product Development
|
Compulsory | 0 | 40 |
|
Techniques and Methods
Master's Degree in Industrial Design Engineering
|
Compulsory | 0 | 36 |
|
Technology for professorship of bachelor
University Master´s Degree in Compulsory Secondary Teachers, Upper Secondary Education, Professional Training and Language Teaching
University Master´s Degree in Compulsory Secondary Teachers, Upper Secondary Education, Professional Training and Language Teaching. Specialization in Experimental Sciences, Mathematics, Technology and Physical Education (Technology)
|
Compulsory | 0 | 11 |
|
Theory of Machines
Engineering Degree in Industrial Design and Product Development
|
Compulsory | 0 | 97.5 |
| Subject and involved studies | Type | Distance hours | Total hours |
|---|---|---|---|
|
Design Management
Master's Degree in Industrial Design Engineering
|
Compulsory | 0 | 18 |
|
Mechanical Systems
Engineering Degree in Industrial Design and Product Development
|
Compulsory | 0 | 44.5 |
|
Techniques and Methods
Master's Degree in Industrial Design Engineering
|
Compulsory | 0 | 36 |
|
Technology for professorship of bachelor
University Master´s Degree in Compulsory Secondary Teachers, Upper Secondary Education, Professional Training and Language Teaching
University Master´s Degree in Compulsory Secondary Teachers, Upper Secondary Education, Professional Training and Language Teaching. Specialization in Experimental Sciences, Mathematics, Technology and Physical Education (Technology)
|
Compulsory | 0 | 11 |
|
Theory of Machines
Engineering Degree in Industrial Design and Product Development
|
Compulsory | 0 | 97.5 |
| Subject and involved studies | Type | Distance hours | Total hours |
|---|---|---|---|
|
Design Management
Master's Degree in Industrial Design Engineering
|
Compulsory | 0 | 18 |
|
Mechanical Systems
Engineering Degree in Industrial Design and Product Development
|
Compulsory | 0 | 44.5 |
|
Techniques and Methods
Master's Degree in Industrial Design Engineering
|
Compulsory | 0 | 36 |
|
Technology for professorship of bachelor
University Master´s Degree in Compulsory Secondary Teachers, Upper Secondary Education, Professional Training and Language Teaching
University Master´s Degree in Compulsory Secondary Teachers, Upper Secondary Education, Professional Training and Language Teaching. Specialization in Experimental Sciences, Mathematics, Technology and Physical Education (Technology)
|
Compulsory | 0 | 11 |
|
Theory of Machines
Engineering Degree in Industrial Design and Product Development
|
Compulsory | 0 | 97.5 |
| Subject and involved studies | Type | Distance hours | Total hours |
|---|---|---|---|
|
Design Management
Master's Degree in Industrial Design Engineering
|
Compulsory | 0 | 18 |
|
Mechanical Systems
Engineering Degree in Industrial Design and Product Development
|
Compulsory | 0 | 44.5 |
|
Techniques and Methods
Master's Degree in Industrial Design Engineering
|
Compulsory | 0 | 36 |
|
Technology for professorship of bachelor
University Master´s Degree in Compulsory Secondary Teachers, Upper Secondary Education, Professional Training and Language Teaching
University Master´s Degree in Compulsory Secondary Teachers, Upper Secondary Education, Professional Training and Language Teaching. Specialization in Experimental Sciences, Mathematics, Technology and Physical Education (Technology)
|
Compulsory | 0 | 11 |
|
Theory of Machines
Engineering Degree in Industrial Design and Product Development
|
Compulsory | 0 | 97.5 |
| Subject and involved studies | Type | Distance hours | Total hours |
|---|---|---|---|
|
Design Management
Master's Degree in Industrial Design Engineering
|
Compulsory | 0 | 18 |
|
Mechanical Systems
Engineering Degree in Industrial Design and Product Development
|
Compulsory | 0 | 40 |
|
Techniques and Methods
Master's Degree in Industrial Design Engineering
|
Compulsory | 0 | 36 |
|
Technology for professorship of bachelor
University Master´s Degree in Compulsory Secondary Teachers, Upper Secondary Education, Professional Training and Language Teaching
University Master´s Degree in Compulsory Secondary Teachers, Upper Secondary Education, Professional Training and Language Teaching. Specialization in Experimental Sciences, Mathematics, Technology and Physical Education (Technology)
|
Compulsory | 0 | 11 |
|
Theory of Machines
Engineering Degree in Industrial Design and Product Development
|
Compulsory | 0 | 97.5 |
Defined tutoring by teacher for 2024/2025 academic course.
| Quarter | Day | Site |
|---|---|---|
| 1st quarter |
Tuesday
10:00 a 13:00 |
Despacho 2.3 |
| 1st quarter |
Wednesday
10:00 a 13:00 |
Despacho 2.3 |
| 2nd quarter |
Tuesday
10:00 a 13:00 |
Despacho 2.3 |
| 2nd quarter |
Wednesday
10:00 a 13:00 |
Despacho 2.3 |
No available EOG works or final master thesis directed by current teacher since 2013 year.
Select merit type and year to query research merits.
AXUDAS PARA A CONSOLIDACIÓN E ESTRUCTURACIÓN DE UNIDADES DE INVESTIGACIÓN COMPETITIVAS.GRC 2023
| Funding entity | CONSELLERIA DE EDUCACIÓN, UNIVERSIDADE E FORMACIÓN PROFESIONAL |
| Main researches | CUADRADO ARANDA, FRANCISCO JAVIER |
| Type | Proyecto Programas Autonomicos |
| Dates | From 01/01/2023 to 20/11/2026 |
Captura, reconstrucción y análisis neuro-músculo-esquelético del movimiento humano en tiempo real, con consideración de la fatiga muscular
| Funding entity | Ministerio de Ciencia e Innovación |
| Main researches | Javier Cuadrado Aranda(IP1) / Urbano Lugrís Armesto) (IP2) |
| Type | Proyecto Programas Nacionales |
| Dates | From 01/09/2023 to 31/08/2026 |
AXUDAS PARA A CONSOLIDACIÓN E ESTRUCTURACIÓN DE UNIDADES DE INVESTIGACIÓN COMPETITIVAS, GRC
| Funding entity | CONSELLERIA DE EDUCACIÓN, UNIVERSIDADE E FORMACIÓN PROFESIONAL |
| Main researches | Francisco Javier Cuadrado Aranda |
| Type | Proyecto Programas Autonomicos |
| Dates | From 01/01/2019 to 20/11/2022 |
Estudio de la relación entre eficiencia y nivel de detalle en modelos biomecánicos del cuerpo humano
| Funding entity | Ministerio de Ciencia, Innovación y Universidades |
| Main researches | Urbano Lugrís Armesto /Javier Cuadrado Aranda |
| Type | Proyecto Programas Nacionales |
| Dates | From 01/01/2019 to 31/12/2021 |
Consolidación y estructuración de unidades de investigación competitivas del Sistema Universitario de Galicia, modalidad Grupos con Potencial de Crecimiento
| Funding entity | Consellería de Cultura, Educación e Ordenación Universitaria |
| Main researches | Javier Cuadrado |
| Type | Proyecto Programas Autonomicos |
| Dates | From 01/01/2017 to 30/11/2018 |
Ortesis híbrida motor-FES de bajo coste para la marcha de lesionados medulares y métodos de simulación para ayuda al diseño y la adaptación
| Funding entity | Ministerio de Economía y Competitividad (MINECO) |
| Main researches | Francisco Javier Cuadrado Aranda/Lugrís Armesto, Urbano |
| Type | Proyecto Programas Nacionales |
| Dates | From 01/01/2016 to 31/12/2018 |
Convenio Marco entre la Universidad de La Coruña y el Centro Tecnológico del Mar para el Desarrollo de Actividades Científicas y de Transferencia Tecnológica
| Funding entity | CENTRO TECNOLÓGICO DEL MAR (CETMAR) |
| Main researches | José Antonio Orosa García |
| Type | Contrato |
| Dates | From 19/03/2015 to 19/03/2017 |
Diseño de una ortesis activa innovadora para la marcha de lesionados medulares incompletos mediante métodos de análisis y predicción de movimiento y modelos músculo-esqueléticos complejos
| Funding entity | Ministerio de Economía y Competitividad (MINECO) |
| Main researches | Javier Cuadrado Aranda |
| Type | Proyecto Programas Nacionales |
| Dates | From 01/01/2013 to 31/12/2015 |
Consolidación y estructuración de unidades de investigación competitivas del Sistema Universitario de Galicia, modalidad Grupos con Potencial de Crecimiento
| Funding entity | xunta de galicia, consellería de cultura, educación e ordenación universitaria |
| Main researches | Javier Cuadrado Aranda |
| Type | Proyecto Programas Autonomicos |
| Dates | From 01/01/2013 to 31/12/2015 |
Red Nacional de Ingeniería Mecánica
| Funding entity | Ministerio de Economía y Competitividad (MINECO) |
| Main researches | Lourdes Rubio Ruiz de Aguirre |
| Type | Proyecto Programas Nacionales |
| Dates | From 01/01/2012 to 31/12/2012 |
Red Nacional de Ingeniería Mecánica
| Funding entity | Ministerio de Economía y Competitividad |
| Main researches | Óscar Altuzarra Maestre |
| Type | Proyecto Programas Nacionales |
| Dates | From 01/01/2011 to 31/12/2011 |
Aplicación de técnicas de dinámica multicuerpo al diseño de ortesis activas para ayuda a la marcha.
| Funding entity | Ministerio de Economía y Competitividad |
| Type | Proyecto Otros Programas |
| Dates | From 01/01/2010 to 31/12/2012 |
Desarrollo y validación de un modelo detallado de automóvil para su ejecución a bordo como herramienta de control.
| Funding entity | Ministerio de Economía y Competitividad |
| Main researches | MIGUEL A. NAYA |
| Type | Proyecto Otros Programas |
| Dates | From 01/01/2010 to 31/12/2012 |
Red Nacional de Ingeniería Mecánica
| Funding entity | Ministerio de Economía y Competitividad |
| Main researches | Francisco Javier Cuadrado Aranda |
| Type | Proyecto Otros Programas |
| Dates | From 01/01/2010 to 31/12/2010 |
Consolidación y estructuración de unidades de investigación competitivas del sistema gallego de I+D
| Funding entity | xunta de galicia, consellería de economía e industria |
| Main researches | Javier Cuadrado Aranda |
| Type | Proyecto Programas Autonomicos |
| Dates | From 01/01/2010 to 31/12/2010 |
RED NACIONAL DE DINÁMICA MULTICUERPO
| Funding entity | Ministerio de Ciencia e Innovación |
| Main researches | Francisco Javier Cuadrado Aranda |
| Type | Proyecto Otros Programas |
| Dates | From 01/01/2009 to 31/12/2009 |
Consolidación e estruturación de grupos de investigación: "Laboratorio de ingeniería mecánica: LIM".
| Funding entity | Consellería de Economía e Industria |
| Type | Proyecto Otros Programas |
| Dates | From 01/01/2009 to 16/12/2009 |
Desarrollo de un sistema ICC (Integral Chassis Control) con observador de estados
| Funding entity | Centro Tecnológico de Automoción de Galicia, CTAG |
| Main researches | Javier Cuadrado Aranda |
| Type | Contrato |
| Dates | From 01/01/2008 to 31/12/2009 |
Investigación sobre optimización energética de instalaciones de climatización en base a la recuperación energética del calor latente de cambio de estado del vapor de agua presente en el aire húmedo
| Funding entity | Espacios Termolúdicos S. A. |
| Main researches | José Antonio Orosa García |
| Type | Contrato |
| Dates | From 01/09/2008 to 30/09/2010 |
Participación en el proyecto europeo Carvision
| Funding entity | Centro Tecnológico de Automoción de Galicia, CTAG |
| Main researches | Javier Cuadrado Aranda |
| Type | Contrato |
| Dates | From 01/12/2007 to 28/02/2008 |
Tiempo real en dinámica de sistemas multicuerpo: aplicaciones en flexibilidad y control
| Funding entity | Plan Nacional I+D, Ministerio de Educación y Ciencia |
| Main researches | Fco Javier Cuadrado Aranda |
| Type | Proyecto Otros Programas |
| Dates | From 01/10/2006 to 30/09/2009 |
CONVENIO DE COLABORACIÓN ENTRE LA FUDC Y LA EMPRESA JORNEL INGENIERÍA, S.L.
| Funding entity | JORNEL INGENIERÍA, S.L. |
| Type | Contrato |
| Dates | From 27/09/2004 to 27/03/2005 |
Recubrimientos cerámicos de aceros mediante láser de CO2
| Funding entity | Secretaria Xeral de Investigación e Desenvolvemento Tecnolóxico |
| Main researches | Armando José Yáñez Casal |
| Type | Proyecto Otros Programas |
| Dates | From 30/10/2003 to 29/10/2006 |
Sistema Láser Pulsado: Fuente de Nd:YAG y Mesa Óptica
| Funding entity | Xunta de Galicia, incentivos para proyectos de la CICYT |
| Main researches | Armando J. Yáñez Casal |
| Type | Proyecto Programas Autonomicos |
| Dates | From 01/01/2000 to 31/12/2000 |
El láser como tecnología limpia: Aplicación a la descontaminación de superficies
| Funding entity | Consellería de Medio Ambiente e Ordenación do Territorio |
| Main researches | Alberto Ramil Rego |
| Type | Proyecto Otros Programas |
| Dates | From 01/01/1999 to 31/12/2002 |
Recubrimiento de válvulas de motores diesel mediante láser de CO2
| Funding entity | Comisión Interministerial de Ciencia y Tecnología (CICYT) |
| Main researches | Armando José Yáñez Casal |
| Type | Proyecto Otros Programas |
| Dates | From 30/12/1999 to 31/12/2001 |
Hosting and Training of Researchers on the Study and Testing of Components and Systems for Urban and Rail Electrical Transport
| Funding entity | Union Europea |
| Main researches | Carlo D'Angió |
| Type | Proyecto UE |
| Dates | From 01/01/1994 to 31/12/1997 |
Sistema de Monitorización y Control de Procesos de Tratamiento Térmico Superficial de Materiales con Láser Mediante un Control Neuronal Adaptativo Mediante Modelo de Referencia
| Type | Patente |
| Entity | |
| Authors | Jose Antonio Pérez Rodríguez, José Luis Ocaña Moreno, Carlos Molpeceres Alvarez |
| Application date | 26/09/2006 |
| Approval date | 20/11/2008 |
A new modelling procedure of the engine room ventilation system for work risk prevention and energy saving
| Authors | J. A. Orosa, A. M. Costa, Jose Antonio Pérez Rodríguez |
| Journal | Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment Vol. 231 Num. 4 (pages 863 to 870) |
| DOI | https://doi.org/10.1177/1475090216687148 |
A new approach to develop marine power system simulators for marine engineers teaching and professional training
| Authors | Jose Antonio Pérez Rodríguez, Jose Antonio Orosa García, Rebeca Bouzón Otero |
| Journal | INTERNATIONAL JOURNAL OF ENGINEERING EDUCATION Vol. 32 Num. 1 (pages 294 to 302) |
Energetic optimization of the ventilation system in modern ships
| Authors | Jose Antonio Pérez Rodríguez, J. A. Orosa, A. M. Costa |
| Journal | Applied thermal engineering Vol. 108 (pages 816 to 823) |
| DOI | https://doi.org/10.1016/j.applthermaleng.2016.07.176 |
A three-dimensional CFD simulation study to reduce heat stress in ships
| Authors | Jose Antonio Pérez Rodríguez, Jose Antonio Orosa García, T. Grueiro |
| Journal | APPLIED THERMAL ENGINEERING Vol. 94 (pages 413 to 420) |
| DOI | https://doi.org/10.1016/j.applthermaleng.2015.11.001 |
A new procedure for wind energy systems maintenance design
| Authors | Angel Martín Costa Rial, Feliciano Fraguela Diaz, Jose Antonio Orosa García, Jose Antonio Pérez Rodríguez |
| Journal | Journal of Renewable and Sustainable Energy Vol. 7 Num. 4 (pages 1 to 11) |
| DOI | https://doi.org/10.1063/1.4928872 |
Design and implementation of an innovative quadratic gaussian control system for laser surface treatments
| Authors | Jose Antonio Pérez Rodríguez, Manuel López López |
| Journal | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY Vol. 65 Num. 9-12 (pages 1785 to 1790) |
| DOI | https://doi.org/10.1007/s00170-012-4300-3 |
Automotive Observers based on Multibody Models and the Extended Kalman Filter
| Authors | Javier Cuadrado, Daniel Dopico Dopico, Jose Antonio Pérez Rodríguez, Roland Pastorino |
| Journal | MULTIBODY SYSTEM DYNAMICS Vol. 27 Num. 1 (pages 3 to 19) |
Geared PM coreless motor modelling for driver¿s force feedback in steer-by-wire systems
| Authors | Roland Pastorino, Miguel Ángel Naya, Jose Antonio Pérez Rodríguez, Javier Cuadrado |
| Journal | MECHATRONICS Vol. 21 Num. 6 (pages 1043 to 1054) |
| DOI | https://doi.org/10.1016/j.mechatronics.2011.05.006 |
A Practical Case Study of the Relationship between Work Risk Prevention and Fatigue at Work in Spanish Merchant Ships
| Authors | Jose Antonio Orosa García, Rafael Santos, Jose A. Perez |
| Journal | HUMAN FACTORS AND ERGONOMICS IN MANUFACTURING & SERVICE INDUSTRIES Vol. 21 Num. 5 (pages 484 to 492) |
Adaptive Neurofuzzy ANFIS Modeling of Laser Surface Treatments
| Authors | Jose Antonio Pérez Rodríguez, Manuel Jesus González Castro, Daniel Dopico Dopico |
| Journal | NEURAL COMPUTING & APPLICATIONS Vol. 19 Num. 1 (pages 85 to 90) |
Neural modeling of laser surface treatments
| Authors | Jose Antonio Pérez Rodríguez, Jose Antonio Orosa García |
| Journal | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY Vol. 46 Num. 5 (pages 605 to 610) |
Adaptive neural network control system for laser surface heat treatments
| Authors | Jose Antonio Pérez Rodríguez, José Luis Ocaña Moreno, Carlos Molpeceres Álvarez |
| Journal | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY Vol. 41 (pages 513 to 518) |
Design of an Advanced Incremental Fuzzy Logic Controller for Laser Surface Heat Treatments
| Authors | Jose Antonio Pérez Rodríguez, José Luis Ocaña Moreno, Carlos Molpeceres Álvarez |
| Journal | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY Vol. 36 (pages 732 to 737) |
Implementation and Efficiency of Two Geometric Stiffening Approaches
| Authors | Urbano Lugris, Miguel Ángel Naya, Jose Antonio Pérez Rodríguez, Javier Cuadrado |
| Journal | MULTIBODY SYSTEM DYNAMICS Vol. 20 Num. 2 (pages 147 to 161) |
Model Reference Adaptive Control System for Laser Surface Treatments
| Authors | Jose Antonio Pérez Rodríguez, Manuel Jesus González Castro, Miguel Ángel Naya |
| Journal | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART I-JOURNAL OF SYSTEMS AND CONTROL ENGINEERING Vol. 222 Num. 8 (pages 875 to 881) |
Real-time Multibody Formulation for VR-Based Design and Evaluation of Automobile Controllers
| Authors | Miguel Ángel Naya, Daniel Dopico Dopico, Jose Antonio Pérez Rodríguez, Javier Cuadrado |
| Journal | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MU Vol. 221 Num. 2 (pages 261 to 276) |
Hybrid fuzzy logic control of laser surface heat treatments
| Authors | Jose Antonio Pérez Rodríguez, José Luis Ocaña Moreno, Carlos Molpeceres Alvarez |
| Journal | APPLIED SURFACE SCIENCE Vol. 254 Num. 4 (pages 879 to 883) |
Optimización del recorrido y de la potencia de una haz láser de Co2 en el tratamiento térmico de válvulas de motores diesel
| Authors | José Manuel Amado Paz, Carlos Álvarez-Feal, Ginés Nicolás Costa, Ana Jesús López Díaz, Jose Antonio Pérez Rodríguez, Alberto Ramil Rego, Emilio Saavedra Otero, Josefa Sanesteban Raposo, María José Tobar Vidal, Armando José Yáñez Casal |
| Journal | REVISTA DE METALURGIA (pages 89 to 94) |
Aplicación de la lógica borrosa al control de procesos de tratamiento térmico superficial de materiales con láser
| Authors | Jose Antonio Pérez Rodríguez, Armando José Yáñez Casal, José Luis Ocaña Moreno |
| Journal | ANALES DE INGENIERÍA MECÁNICA Vol. 3 Num. 15 (pages 2039 to 2044) |
Modelización de las transformaciones de fase en el proceso de endurecimiento de aceros con láser
| Authors | José Manuel Amado Paz, Carlos Álvarez-Feal, Ginés Nicolás Costa, Ana Jesús López Díaz, Jose Antonio Pérez Rodríguez, Alberto Ramil Rego, Emilio Saavedra Otero, Josefa Sanesteban Raposo, María José Tobar Vidal, Armando José Yáñez Casal |
| Journal | REVISTA DE METALURGIA Vol. 40 Num. 2 (pages 365 to 368) |
Modelización y monitorización de procesos de refusión láser de recubrimientos depositados por plasma
| Authors | José Manuel Amado Paz, Carlos Álvarez-Feal, Ginés Nicolás Costa, Ana Jesús López Díaz, Jose Antonio Pérez Rodríguez, Alberto Ramil Rego, Emilio Saavedra Otero, Josefa Sanesteban Raposo, María José Tobar Vidal, Armando José Yáñez Casal |
| Journal | BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO Vol. 43 Num. 2 (pages 441 to 444) |
Modelling of temperature evolution on metals during laser hardening process
| Authors | Armando José Yáñez Casal, Carlos Álvarez-Feal, Ana Jesús López Díaz, Ginés Nicolás Costa, Jose Antonio Pérez Rodríguez, Alberto Ramil Rego, Emilio Saavedra Otero |
| Journal | APPLIED SURFACE SCIENCE Num. 186 (pages 611 to 616) |
Aplicación de Estrategias de Control Avanzado al Proceso de Endurecimiento de Materiales con Láser
| Authors | Jose Antonio Pérez Rodríguez, Carlos Álvarez-Feal, Ginés Nicolás Costa, José Luis Ocaña Moreno, Armando José Yáñez Casal |
| Journal | ANALES DE INGENIERÍA MECÁNICA Num. 2 (pages 1159 to 1165) |
Modelado de Uniones con Abaqus
| Authors | Jose Antonio Pérez Rodríguez, Manuel López López |
| Publishing | Bubok Publishing S.L, Coruña, A (España) |
| ISBN | 978-84-686-3564-4 |
Revisión de las Uniones Semirrígidas. Diseño y Casos Prácticos
| Authors | Manuel López López, Jose Antonio Pérez Rodríguez |
| Publishing | Bubok Publishing S.L, (España) |
| ISBN | 978-84-686-3512-5 |
Termodinámica Aplicada con EES
| Authors | Jose Antonio Orosa García, Jose Antonio Pérez Rodríguez |
| Publishing | Tórculo Ediciones, Coruña, A (España) |
| ISBN | 978-84-8408-477-8 |
Monitorización y Control Avanzado de Procesos de Tratamiento de Materiales con Láser
| Authors | Jose Antonio Pérez Rodríguez, José Luis Ocaña Moreno, Carlos Molpeceres Álvarez |
| Publishing | Servicio de Publicaciones de la E.T.S.I.I. de la Universidad Politécnica de Madrid, Madrid (España) |
| ISBN | 978-84-7484-203-6 |
Research About the Risk of Explosion on Board from Using Liquefied Natural Gas as Fuel
| Authors | S. Galán. Jose Antonio Orosa García. Angel Rodriguez Fernández. Jose Antonio Pérez Rodríguez |
| Book |
Ships and Shipbuilding: Types, Design Considerations and Environmental Impact Publishing: Nova Science Publishers . ISBN: 978-1-62618-787-0 |
| Pages | From 105 to 124 |
Research About Safety of Wire Rope on Board
| Authors | S. Galán. Jose Antonio Orosa García. Angel Rodriguez Fernández. Jose Antonio Pérez Rodríguez |
| Book |
Ships and Shipbuilding: Types, Design Considerations and Environmental Impact Publishing: Nova Science Publishers . ISBN: 978-1-62618-787-0 |
| Pages | From 125 to 150 |
Análisis del consumo de energía en ambientes interiores
| Autor | Maria Teresa Grueiro Domínguez |
| Director/s | José Antonio Pérez Rodríguez; José Antonio Orosa García |
| Scope | Energía y Propulsión Marina |
| Qualification | Sobresaliente Cum Laude |
A New Understanding of Wind Energy Production Maintenance Based on Analysis of Variance
International Conference on Energy, Environment, Ecosystems and Development, EEED 2015
International
| Authors | Angel Martín Costa Rial, Feliciano Fraguela Diaz, Jose Antonio Orosa García, Jose Antonio Pérez Rodríguez |
| Place | Barcelona (España) |
A New Methodology to Design Thermodynamic Power Station Simulators for Marine Engineering Studies
International Conference on Education and Educational Technologies, EET 2015
International
| Authors | Angel Martín Costa Rial, Rebeca Bouzón Otero, Jose Antonio Orosa García, Jose Antonio Pérez Rodríguez |
| Place | Barcelona (España) |
Influence of the Sensored Magnitude in the Performance of Observers Based on Multibody Models and the Extended Kalman Filter
ECCOMAS Thematic Conference Multibody Dynamics 2009
International
| Authors | Javier Cuadrado, Daniel Dopico Dopico, Jose Antonio Pérez Rodríguez, Roland Pastorino |
| Place | Varsovia (Polonia) |
Design of an innovative Hybrid Fuzzy Controller for laser surface treatments
IECON 2009. 35th Annual Conference of the IEEE Industrial Electronics Society
International
| Authors | Jose Antonio Pérez Rodríguez, Alberto Luaces Fernández, Roland Pastorino |
| Place | Porto (Portugal) |
Galician climatic change effect on wind power production
The 2º International Conference on Power Engineering, Energy and Electrical Devices
International
| Authors | Jose Antonio Orosa García, Enrique Juan García-Bustelo García, Jose Antonio Pérez Rodríguez |
| Place | Lisboa (Portugal) |
Wind turbine concentrator design based on moist air phase change
The 2º International Conference on Power Engineering, Energy and Electrical Devices
International
| Authors | Jose Antonio Orosa García, Enrique Juan García-Bustelo García, Jose Antonio Pérez Rodríguez |
| Place | Lisboa (Portugal) |
X-by-wire vehicle prototype: a steer-by-wire system with geared pm coreless motors
7th EUROMECH Solid Mechanics Conference, ESMC 2009
International
| Authors | Roland Pastorino, Miguel Ángel Naya, Jose Antonio Pérez Rodríguez, Javier Cuadrado |
| Place | Varsovia (Polonia) |
Time reduction of marine engineer's learning process
Fourth International Congress on Maritime Transport. Maritime Transport 2009
International
| Authors | Jose Antonio Orosa García, Jose Antonio Pérez Rodríguez |
| Place | Barcelona (España) |
Climate effects in low speed wind turbine's concentrators
The 2º International Conference on Power Engineering, Energy and Electrical Devices
International
| Authors | Jose Antonio Orosa García, Enrique Juan García-Bustelo García, Jose Antonio Pérez Rodríguez |
| Place | Lisboa (Portugal) |
Diseño de un Sistema de Monitorización y Control de Procesos De Tratamiento Térmico Superficial de Materiales con Láser Mediante Realimentación de Estados
XVII CONGRESO NACIONAL DE INGENIERÍA MECÁNICA.
International
| Authors | Jose Antonio Pérez Rodríguez, José Luis Ocaña Moreno, Carlos Molpeceres Álvarez, Miguel Morales Furió, Manuel Blasco Litago, Angel García Beltrán |
| Organization | Universidad de Oviedo |
| Place | Gijón (España) |
Real Time Fuzzy Logic Control of Laser Surface Heat Treatments
IEEE International Symposium on Industrial Electronics (ISIE 2007)
International
| Authors | Jose Antonio Pérez Rodríguez, José Luis Ocaña Moreno, Carlos Molpeceres Álvarez |
| Place | Vigo (España) |
Neural control of laser surface heat treatments
Fourth International WLT-Conference on Lasers in Manufacturing
International
| Authors | Jose Antonio Pérez Rodríguez, José Luis Ocaña Moreno, Carlos Molpeceres Álvarez |
| Place | Munich (Alemania) |
Neural model reference control of laser surface heat treatments
IEEE International Symposium on Industrial Electronics (ISIE 2007)
International
| Authors | Jose Antonio Pérez Rodríguez, José Luis Ocaña Moreno, Carlos Molpeceres Álvarez |
| Place | Vigo (España) |
Hybrid Fuzzy Logic Control of Laser Surface Heat Treatments
International Symposium of European Materials Research Society Spring Meeting,EMRS 2007
International
| Authors | Jose Antonio Pérez Rodríguez, José Luis Ocaña Moreno, Carlos Molpeceres Álvarez |
| Place | Estrasburgo (Francia) |
Homologación de Planes de Estudio.
III Jornadas de Calidad de los Servicios Educativos y de Formación: Acreditación, Certificación e Innovación
National
| Authors | Jose Antonio Pérez Rodríguez, Muñoz-Camacho, E., Luis Carlos Velón Sixto |
| Place | Sevilla (España) |
Fuzzy Logic Control of Laser Surface Heat Treatments
Third International WLT - Conference on Lasers in Manufacturing 2005
International
| Authors | Jose Antonio Pérez Rodríguez, José Luis Ocaña Moreno, Carlos Molpeceres Alvarez |
| Place | Munich (Alemania) |
Modelling of the surface properties in Laser Heat Treatments
TMT 2003. Trends in the Development of Machinery and Associated Technology
International
| Authors | Armando José Yáñez Casal, José Manuel Amado Paz, Carlos Álvarez-Feal, Ginés Nicolás Costa, Ana Jesús López Díaz, Jose Antonio Pérez Rodríguez, Alberto Ramil Rego, Emilio Saavedra Otero, Josefa Sanesteban Raposo, María José Tobar Vidal |
| Place | Lloret de Mar (España) |
Virtual Laboratory of Physics
Physics on Stage
International
| Authors | Alberto Ramil Rego, Armando José Yáñez Casal, Ana Jesús López Díaz, Carlos Álvarez-Feal, Ginés Nicolás Costa, Emilio Saavedra Otero, Jose Antonio Pérez Rodríguez, Josefa Sanesteban Raposo |
| Place | Noordwijk (Países Bajos) |
Desarrollo de un laboratorio virtual de física
XXIX Reunión Bienal de la Real Sociedad Española de Física
National
| Authors | Alberto Ramil Rego, Armando José Yáñez Casal, Ana Jesús López Díaz, Carlos Álvarez-Feal, Ginés Nicolás Costa, Emilio Saavedra Otero, Jose Antonio Pérez Rodríguez, Josefa Sanesteban Raposo |
| Place | Madrid (España) |
Laboratorio virtual de Física
Física en Acción
National
| Authors | Alberto Ramil Rego, Armando José Yáñez Casal, Ana Jesús López Díaz, Carlos Álvarez-Feal, Ginés Nicolás Costa, Emilio Saavedra Otero, Jose Antonio Pérez Rodríguez, Josefa Sanesteban Raposo |
| Place | España |
Diseño de un sistema de control neuronal para procesos de tratamiento térmico de materiales con láser
XV Congreso Nacional de Ingeniería Mecánica
National
| Authors | Jose Antonio Pérez Rodríguez, Armando José Yáñez Casal, José Luis Ocaña Moreno |
| Place | Cádiz (España) |
Modelización y monitorización de procesos de refusión láser de recubrimientos depositados por plasma
VII Congreso Nacional de Materiales y XLII Congreso SECV
National
| Authors | Armando José Yáñez Casal, Ginés Nicolás Costa, Ana Jesús López Díaz, Jose Antonio Pérez Rodríguez, Emilio Saavedra Otero |
| Place | Madrid (España) |
Prediction of Temperatura Evolution on Metals During Láser Hardening Process.
E-MRS Spring Meeting 2001.
International
| Authors | Armando José Yáñez Casal, Ana Jesús López Díaz, Ginés Nicolás Costa, Jose Antonio Pérez Rodríguez, Alberto Ramil Rego, Emilio Saavedra Otero, José Carlos Álvarez Feal |
| Place | Strasbourg (Francia) |
Real Time Control and Monitoring of Laser Hardening Process: Aplication to Cylindrical Workpieces.
3 International Conference on Laser Assisted Net Shape Engineering 3.
International
| Authors | Armando José Yáñez Casal, Ana Jesús López Díaz, Ginés Nicolás Costa, Jose Antonio Pérez Rodríguez, Alberto Ramil Rego, Emilio Saavedra Otero, José Luis Ocaña Moreno, José Carlos Álvarez Feal |
| Place | Erlangen (Alemania) |
Tratamiento superficial de materiales metálicos por láser.
Reunión Bienal de la Real Sociedad Española de Física.
International
| Authors | Armando José Yáñez Casal, Ana Jesús López Díaz, Ginés Nicolás Costa, Jose Antonio Pérez Rodríguez, Alberto Ramil Rego, Emilio Saavedra Otero, Josefa Sanesteban Raposo, José Manuel Amado Paz, José Carlos Álvarez Feal |
| Place | Sevilla (España) |
Aplicación de Estrategias de Control Avanzado al Proceso de Endurecimiento de Materiales con Láser
XIV Congreso Nacional de Ingeniería Mecánica
National
| Authors | Jose Antonio Pérez Rodríguez, Carlos Álvarez-Feal, Ginés Nicolás Costa, José Luis Ocaña Moreno, Armando José Yáñez Casal |
| Place | Madrid (España) |
An antislipping fuzzy logic controller for a railway traction system
6th IEEE International Conference on Fuzzy Systems. FUZZ-IEEE- 97
International
| Authors | M Garcia Rivera, R Sanz, Jose Antonio Pérez Rodríguez |
| Organization | IEEE Communitation Society |
| Place | Barcelona (España) |
Academic or management positions held by teacher.